User manual BELKIN USB 2.0 AND FIREWIRE 6-PORT PCI CARD

[. . . ] Now you can upgrade your computer to the latest USB and FireWire ® technology. You will be able to take advantage of a host of new Hi-Speed USB 2. 0 and FireWire products--including hard drives, scanners, printers, video cameras, and more--will all work much faster than ever before. Your current USB devices will continue to work as they always have and, in some cases, even better with this PCI Card. [. . . ] Apply pressure as needed until the Card is fully seated. Secure the PCI Card with the screw removed in step 3. After installing the PCI Card, replace the outer cover and turn on the computer. When Windows restarts, the PCI Card will be detected and install drivers for two "Ali PCI to USB Open Host Controller", one "Standard Enhanced PCI to USB Host Controller", one "USB 2. 0 Root Hub" , two "Root Hub" entries , and one "OHCI Compliant IEEE 1394 Host Controller". Note: Depending on the speed of your computer, it may take up to 45 seconds for the PCI Card to be detected. Click the plus sign (+) next to "Universal Serial Bus Controller". The "Universal Serial Bus Controllers" list will now include two "ALi PCI to USB Open Host Controller" entries, one "Standard Enhanced PCI to USB Host Controller", one entry for "USB 2. 0 Root Hub" , and two entries for "USB Root Hub". Note: If your computer features built-in USB ports, or if you have other USB PCI controllers installed, you will see additional root hub entries. Click the plus sign (+) next to "IEEE 1394 Bus Controller". the "IEEE 1394 Bus Controller" list will now include one "OHCI Compliant IEEE 1394 Host Controller" entry. Note: If your computer features built-in IEEE 1394 ports, or if you have other IEEE 1394 PCI host controller cards installed, you will see additional IEEE 1394 host controller entries. If Windows 2000 with Service Pack 3 or below is installed on your computer, follow the instructions below. After a few moments, the main menu will automatically start and display each of the available installation options. Open the Start menu in the lower, left-hand corner of your Windows display, then select "Shut Down" and click "OK". Once the computer has completely shut down, remove the computer's cover and locate an empty PCI slot. Remove the port cover that corresponds with the PCI slot you wish to use. (The cover is usually held in place with a single screw). Apply pressure as needed until the Card is fully seated. Secure the PCI Card with the screw removed in step 5. After installing the PCI Card, replace the outer cover and turn on the computer. [. . . ] (The cover is usually held in place with a single screw). Apply pressure as needed until the Card is fully seated. Choose "Search for the best driver for your device (Recommended)". Windows will now search the driver database on your hard drive. [. . . ]