User manual BELLO WAVS325 ASSEMBLY

[. . . ] 3 * 12mm SCREW 4 PCS HARDWARE LIST (Continued) PART DESCRIPTION QUANTITY 8. OPTIONAL MOUNTING SYSTEM BOLTS 2 PCS 12. INTERCHANGEABLE GLASS DOOR PANELS 1 PAIR 13. ALLEN WRENCH 1 PC ASSEMBLY INSTRUCTIONS NOTE: 2 PEOPLE ARE RECOMMENDED TO ASSEMBLE THIS FURNITURE. [. . . ] INSERT three cam locks (2) into the upper inside of each cabinet side panel (B) & (C) as shown in Fig. SCREW six cam lock pins (1) into the underside of the cabinet top (F) as shown in Fig. CAREFULLY ALIGN the cam lock pins in the cabinet top (F) with the pre-drilled holes in the upper edges of each cabinet side panels (B) & (C) and SECURE them together by turning the cam locks to tighten. Alignment may require some slight movement of the parts to get the proper fit. Fig. ALIGN the back panel (I) and SECURE with screws (9) as shown in Fig. NOTE: AN OPTIONAL FLAT PANEL MOUNTING SYSTEM, PP-59B (black) and PP-59S (silver) are available from your Bell'O dealer. 5 are used to secure the mount to the cabinet. CAREFULLY TIP the partially assembled cabinet upright. Fig. CAREFULLY ALIGN the door hinges (5) with the pre-drilled holes on the interior of each door (G) & (H), and SECURE them each with two screws (6) as shown in Fig. INSTALL the door knobs (10) using one bolt (13) for each. Fig. Once the cabinet is fully assembled, if needed, you can ALIGN the doors by adjusting the screws on the insides of each hinge using a screw driver as shown. Fig. 10: Interchangeable glass or wood door panels 12 20. This cabinet comes with 2 sets of door panel inserts (solid wood or glass) that can be used. To interchange the door panels, LOOSEN the clips that are used to secure the panel inside the door frame. PLACE the desired panel insert into the door frame. POSITION the clips over the panel and TIGHTEN WHILE BEING CAREFUL NOT TO OVERTIGHTEN THE CLIPS. Thank You For Purchasing The Bell'O WAVS-325 Real Wood Audio Video Cabinet. This Cabinet Is Compatible With The Bell'O PP-59 OPTIONAL FLAT PANEL TELEVISION MOUNTING SYSTEM This heavy duty flat panel TV mounting system is designed to hang a Plasma or LCD TV up to 63" or up to 250 lbs. above select Bell'O® Audio Video Systems. Made of heavy duty, scratch resistant, powder-coated steel, it includes a universal mounting bracket and most common hardware needed for TV mounting. CMS® Cable Management System is included to hide wires and interconnect cables. Available in either Silver (PP-59S) or Black (PP-59B). Designed for the Bell'O® WAVS-320, WAVS-325, WAVS-330, and the PRO Bell'O® PR-10, PR-15, PR-20, PR-25 real wood audio video cabinets. [. . . ] The warranty does not cover: 1) defects caused by improper assembly or disassembly; 2) defects caused by shipping, claims for damage during transit to you should be placed immediately by you to the transportation company; 3) defects occurring after purchase due to product modification, intentional damage, accident, misuse, abuse, negligence or exposure to the elements; 4) cosmetic damage and 5) labor or assembly costs. There are no warranties, express or implied, including without limitation merchantability or fitness for particular use, except as (i) contained herein or (ii) required by applicable law in the state whose law governs (which shall be New Jersey absent controlling law imposing the law of another state in lieu thereof as governing law). All warranties of whatsoever derivation shall be limited to the term set forth above, unless otherwise required by applicable law. Manufacturer's employees or representatives' . . . [. . . ]