User manual BELSON C18-1-4C

[. . . ] That the water inlet and outlet hoses are connected correctly; 3. That the dishwasher is level on the ground. It is worth it: for the longer life span and the correct operation of your dishwasher. 13) Learn to get to know the parts which make up your dishwasher, you will use it better for it. [. . . ] If the water in your area is hard or very hard, we still recommend you pour extra salt into the relevant dispenser to prevent the formation of white streaks on your dishes or on the interior of the appliance. Using a three-in-one product means it is no longer necessary to put rinse aid into the relevant container. If you want to achieve perfectly dry dishes, you may add rinse aid as long as the dosage adjuster is set to no. In any case, please read the manufacturer's instructions on the packet. 16 ARISTON DISHWASHER - Instructions for installation and use Select the right wash cycle D 1509)50-4 Select the right wash cycle for your dishes. Selecting the most suitable wash cycle for the load ensures clean dishes and a more convenient use of water and electricity. A wash cycle for every degree of soil Salt, rinse aid, the right amount of detergent and the correct wash cycle: this is the formula to get the best results and to keep your dishwasher in shape. If the crockery is only lightly soiled or if it has been rinsed with water before being placed in the dishwasher, reduce the amount of detergent used accordingly. Cycle Cycle selection instructions Cycle description Detergent for prewash + wash Rinse Aid Wash cycle duration (tolerance ±10% without extra drying) Hrs. Very dirty dishes and pans (not to be used for delicate items) Intensive Wash Pre-wash with hot water at 40°C Wash at 65°C 2 Cold rinses Hot rinse at 70°C Drying 5 + 25 g * 2:00' Cycle for normally dirty pans and dishes. Daily Wash Preliminary wash cycle for dishes while awaiting completion of the load with the dishes from the next meal. Hot water supply following the sameproceduresasthoseindicated Adjusting the back Feet for the cold water connection. Insert the appliance into the cutout and then adjust the height using the Anti-flooding protection A screws located on the front bottom Your dishwasher is provided with a part of the machine. Use a special system which blocks the screwdriver to turn the screws in water supply in the event of leaks the clockwise or anti-clockwise inside the appliance. It is further direction to increase or decrease equipped with a water inlet hose the height respectively. That can withstand extremely high pressures and that turns bright red Cold water connection. In It is vital that you check it on a First of all, check that the mains the event of replacements, use regular basis: if you see it has turned voltage and frequency values original spare parts only. Bright red, then you know you have correspond to those stated on the Connect the cold water supply to replace it as soon as possible. Rating plate located on the stainless hose to a 3/4 gas threaded Call for an authorised technical steel inner door of the appliance connection, taking care to screw it engineer to come and replace it. And that the electrical system to tightly onto the tap. If the water which the dishwasher is connected hoses are new or have been out of Drain hose connection. Is sized for the maximum current Fit the drain pipe into a drain line indicated on said rating plate. [. . . ] 1 B 2 A C Keep your dishwasher in shape Respecting these few have a reliable work After every wash. When the wash cycle has ended, always remember to turn off the water supply tap and to leave the appliance door ajar. This way, moisture and bad odours will not be trapped inside. Before carrying out any cleaning or maintenance on the dishwasher, always remove the plug from the electricity socket. [. . . ]