User manual BELSON C21-1-4

[. . . ] That the water inlet and outlet hoses are connected correctly; 3. That the dishwasher is level on the ground. It is worth it: for the longer life span and the correct operation of your dishwasher. 13) Learn to get to know the parts which make up your dishwasher, you will use it better for it. [. . . ] You can adapt the amount of rinse aid used by the dishwasher: regulate the adjuster F which you will find under lid C. You can choose from six different positions. Proper dosage of the rinse aid improves drying. If drops of water remain on the dishes or spotting occurs, turn the dosage adjuster to a higher setting. If, on the other hand, the dishes have white streaks, then turn the dosage adjuster down to a lower setting. Warning Three-in-one dishwasher tablets are now available on the market, and combine detergent, salt and rinse aid all in one. If the water in your area is hard or very hard, we still recommend you pour extra salt into the relevant dispenser to prevent the formation of white streaks on your dishes or on the interior of the appliance. Using a three-in-one product means it is no longer necessary to put rinse aid into the relevant container. If you want to achieve perfectly dry dishes, you may add rinse aid as long as the dosage adjuster is set to no. In any case, please read the manufacturer's instructions on the packet. If you use only these products, it is normal for the salt and rinse aid indicator lights to flash permanently after a certain number of cycles. To select the right wash cycle, please consult the wash cycle table on page 17. 18 ARISTON DISHWASHER - Instructions for installation and use After having bought or moved your dishwasher to another home, a correct installation ensures that your dishwasher will operate smoothly and efficiently. Choose where you want to install let the water run to make sure it is your dishwasher, you can even clear and free of impurities before place it so that its sides or back making the connection. If this panel are side by side with furniture precaution is not taken, the water or up against the wall. The inlet could get blocked, causing dishwasher is provided with water damage to your dishwasher. Supply and drain hoses, which can be directed towards the left or right Hot water connection. Your dishwasher can be supplied with hot water from the mains Levelling. Supply (if you have a central heating Once the appliance is positioned, system with radiators) at a tempeadjust the feet by screwing them rature of no more than 60°C. In or out depending on how high In this case, the wash cycle time you want it and to level it so that it will be about 15 minutes shorter is horizontal. Make sure that it is and the wash will be slightly less not inclined more than 2 degrees. If the appliance is level, it will help The connection must be made to ensure its correct operation. [. . . ] Check the sprayer arms regularly and clean them once in a while (letters F and I “How is it made?1 B 2 A C Keep your dishwasher in shape Respecting these few rules ensures you will always have a reliable work companion by your side. When the wash cycle has ended, always remember to turn off the water supply tap and to leave the appliance door ajar. This way, moisture and bad odours will not be trapped inside. [. . . ]