User manual BELSON CM3520

[. . . ] 4) This page includes useful tips to help you load your dishwasher correctly and make the most of all the available space. 5) After loading the dishes, you need to select the right wash cycle and measure out the correct dose of detergent and rinse aid. Reading these pages will help you through all the wash phases. 9) Before washing anything in the dishwasher check the information provided by this section. [. . . ] Now you can select the desired wash cycle. Press the start button "R" and after you hear the beep, the countdown to the delayed start will begin. Once this time is up, the indicator light will stop flashing and the wash cycle will begin. If you have set a 12 hour delay, for example, once you have selected the wash cycle, the 12 hour indicator light will flash followed by the others in sequence until the set time delay is up. A quick look at the indicator lights will keep you informed of the countdown progress at all times. If you change your mind, you can set a shorter time delay: press button "D" to select it. If on the other hand you want to cancel the delay set and you want the cycle to start immediately, press button "D" repeatedly until the cycle starts and indicator light "G" corresponding to the cycle start phase comes on. Dual function of indicator lights "G" 1) flashing to indicate a delayed start: to remind you that you have set a delayed start; 2) on and not flashing beneath the cycle phase symbol: meaning the cycle has started and is in the phase indicated by the symbol. You want to wash on the upper rack only?Remember to use half the amount of detergent. Your dishwasher also allows you to wash half a load, to save water and electricity. Special cycle to be used for more delicate items which are sensitive to high temperatures.   R]  J  5DSLG :DVK Short wash at 113°F Hot rinse at 122°F  R]  J  Short cold wash to prevent food from drying onto the dishes  6RDN &U\VWDO &DUH Wash at 122°F Warm rinse at 104°F Hot rinse at 149°C Drying  R]  J Us ARISTON DISHWASHER - User Manual 7 Water in your home Loading the salt. You can use special water softening salt or normal rock salt. The salt container is situated underneath the lower rack, fill it up as follows: 1. Pull out the lower rack completely, unscrew and remove the container cap 2. First fill the container up with water (you won't have to do this again next time) 3. Put the dishwasher funnel on the hole and pour in approximately 70 oz. It is normal that some water comes out of the container. Never without salt Water hardness varies according to where you live. If the water in your home is hard you have the possibility to add salt in order to soften your water. The softer the water the better will be your washing and drying results. [. . . ] If there are any stains on the surface of the appliance interior, use a cloth dampened with water and a little white vinegar, or a cleaning product specifically made for dishwashers. When you go away for an extended period of time, we recommend you do the following: • run a cycle with the dishwasher empty • turn off the water inlet tap. • leave the appliance door ajar This will help the seals last longer and prevent unpleasant odours from forming inside the appliance. Should the appliance have to be moved, try to keep it in a vertical position. [. . . ]