User manual BENCH KH 2024

[. . . ] Never use combinations of new and used batteries. If the device is disconnected from the mains, the stored data can be retained if the connection is restored within 30 seconds. If not, the stored data will be lost, and the stored information must be input again. Weak battery display : This display lights up if the batteries are discharged. [. . . ] Keep the »DOWN« button pressed to change the time quickly in 10 minute decrements. · If within 15 seconds there has been no further setting made, then the current settings are activated/stored and the device goes once more into automatic operation. 8 2. 4 Setting the local time · Press »MODE« three times if the device is in time display mode. · Press »MODE« four times if the device is in radio mode. · If the device is already in "Date entry" mode as described in Section 2. 3, you can enter "Setting the local time" mode by pressing the »MODE« button once. · The preset local time starts to flash. 'LOCAL CITY' is displayed steadily. · The hours, minutes and the day of the week displays are not displayed here and the display is empty. · By pressing »UP« or »DOWN« you can select the time zone you require from the different codes. : Code Time difference to CET LON 0:00 MUN + 1:00 CAI + 2:00 MOW + 3:00 DXB + 4:00 KHI + 5:00 City London München Kairo Moskau Dubai Karachi DAC BKK HKG TYO SYD NOU WLG --HNL ANC LAX DEN CHI NYC CCS RIO -1H -2H + 6:00 + 7:00 + 8:00 + 9:00 +10:00 +11:00 +12:00 ­11:00 ­10:00 ­ 9:00 ­ 8:00 ­ 7:00 ­ 6:00 ­ 5:00 ­ 4:00 ­ 3:00 ­ 2:00 ­ 1:00 Dhaka Bangkok Hong Kong Tokyo Sydney Nouméa Wellington --Honolulu Anchorage Los Angeles Denver Chicago New York City Caracas Rio de Janeiro ----- · The 'SUN' (sun symbol) display shows the remaining daylight. Press the SNOOZE/RADIO OFF button to activate the display. · If within 15 seconds there has been no further setting 9 made, then the current settings are activated and the device goes back into automatic operation. is made within 15 seconds, the device shows the frequency if the radio is on, or if not, the time again. 2. 5 Checking the world time · Press »MODE« four times if the device is in time display mode. · Press »MODE« five times if the device is in radio mode. · If the device is already in "Setting the local time" mode as described in Section 2. 4, you can enter "Checking the world time" mode by pressing the »MODE« button once. · The last time zone is displayed steadily in the hours and minutes part of the display, while on the right the code for the appropriate city starts to flash. The display shows "CITY" above steadily. · You can select the required time zone by pressing the »UP« or »DOWN« buttons in accordance with the table in Section 2. 4. · Press »SNOOZE« to change the display. The display 'SUN' shows the remaining daylight. · If »MODE« is pressed once, or if no further setting 2. 6 Sleep Timer · Press »SLEEP/RADIO ON« once to check the sleep timer current setting. If the Sleep Timer is not activated, then the display briefly shows "ON" (radio switched on). · Press »SLEEP/RADIO ON« once again to change the current setting. (in decrements of 10 minutes, from 9010 minutes). [. . . ] The 'MEMORY' display is no longer shown. 2. 11 Station search manual /search process · If the radio is on, press »UP« to increase the reception frequency manually (for step sizes, see frequency steps column in the table). · Press »DOWN« in order to change the reception frequency downwards (by a step at a time). · Keep pressing on to »UP« or »DOWN« button for an automatic search (search process) for the nearest receivable radio station. 2. 10 Storing radio stations · Press »MEMORY« once to save the frequency of the radio station currently being received. The 'MEM' display starts to flash. [. . . ]