User manual BENQ C1060

[. . . ] DC C1060/C850 Digital Camera User Manual Welcome Copyright Copyright 2008 by BenQ Corporation. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system or translated into any language or computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual or otherwise, without the prior written permission of this company. Disclaimer BenQ Corporation makes no representations or warranties, either expressed or implied, with respect to the contents hereof and specifically disclaims any warranties, merchantability or fitness for any particular purpose. Further, BenQ Corporation reserves the right to revise this publication and to make changes from time to time in the contents hereof without obligation of this company to notify any person of such revision or changes. All other logos, products, or company names mentioned in this manual may be the registered trademarks or copyrights of their respective companies, and are used for informational purposes only. Disposal of Waste Electrical and Electronic Equipment by users in private households in the European Union. This symbol on the product or on the packaging indicates that this can not be disposed of as household waste. [. . . ] Uses a slow shutter speed to capture exploding fireworks. Enhances the red hue for capturing sunset images. Captures audio. 3. 4. 2 Using the menus When a menu is displayed, the four-way control and are used to make the desired settings. Turn the power on, and set the camera to the capture mode. Press and then press [ ]/[ ] to select the capture menu. Press ]/[ ] to select a menu item and then press [ ] to select an option and press to apply the setting. to close the menu. 3. 4. 2. 1 Menu item Resolution Capture menu list (still image) Available settings C1060: 10 C850: / / / / / / / / / / / (Normal) (Spot) (Cloudy) / (Custom) (Tungsten) / / Quality Metering White Balance (Super Fine) / (Center) / (Auto) / (Fluor_H) / (Fine) / (Multi) / (Daylight) / (Fluor_L) / Using the Camera 11 English Icon Mode Description Menu item ISO Available settings / / / / / / 1600 / 3200 (ISO 3200 is for images at 3 megapixels or lower. ) -2. 0 EV ~ +2. 0 EV Off / Off (highlighted in the rectangular area surrounded by the four corners) (highlighted in the portrait area) (highlighted in the horizontal portrait area) 2 (2 sec. ) / Off / On 10 (10 sec. ) / English 12 EV compensation (Exposure) Drive Mode AEB Highlight (Double) / (Burst) Sharpness Effect Date Stamp S. S. F. (Stabilizer) Face Tracking Photo Frame Digital Zoom (Hard) / (Normal) / (Soft) Normal / B&W / Sepia / Negative / Red / Green / Blue Off / Date / Date & Time Off / On Off / On Off / Choose one out of 10 frames Off / On 3. 4. 2. 2 Menu item Movie Size Metering Capture menu list (movie) Available settings / / page 11) / / / (see 3. 4. 2. 1 "Capture menu list (still image)" on White Balance / / / / / menu list (still image)" on page 11) / (see 3. 4. 2. 1 "Capture Using the Camera 3. 4. 3 Setup menu 2. Press , and then press the [ ]/[ ] to select the Setup menu. Press ]/[ ] to select a menu item and then press [ ] to select an option and press to apply the setting. to close the menu. · Some options may require more steps than what is described here. 3. 4. 3. 1 Menu item Sounds Setup menu list Functions [Shutter] [Start-up] [Beep] [Volume] Sets the shutter sound on and off. Adjusts the volume of the shutter sound, startup sound, beep and playback sound. The captured image will not automatically display after shooting. The captured image will display for 1 second after shooting. The captured image will display for 3 seconds after shooting. The captured image will display for 5 seconds after shooting. For power conservation, the camera is turned off automatically for a period of time. Auto Review [Off] [1 sec. ] [3 sec. ] [5 sec. ] Power Save [1 min. ] [3 min. ] [5 min. ] Date & Time Language File No. Sets the date & time. Select a language for display menus and other information. Use this function if the camera experiences a "Folder cannot be created" error or if you want to restart numbering, for example, after erasing all files. [Series] Stores the latest used file number regardless of deleted files or a change of memory card. This is useful for avoiding file name duplication when images are downloaded to a computer. Resets file numbering each time the memory card is changed. [Reset] Using the Camera 13 English 1. Turn the power on, and set the camera to the capture or playback mode. Menu item TV Out Functions You can review images on a television with a supplied AV cable. TV Out should be set to either NTSC or PAL depending on your region. [. . . ] fired, the image is than the flash's effective range. The exposure is excessive or inadequate. Colors of the images taken are not shown properly. White Balance was not set properly when the images were taken. [. . . ]