User manual BENQ C62

[. . . ] DC C62 Digital Camera User's Manual Welcome Copyright Copyright 2004 by BenQ Corporation. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual, or otherwise, without the prior written permission of this company. Disclaimer BenQ Corporation makes no representations or warranties, either expressed or implied, with respect to the contents hereof and specifically disclaims any warranties, merchantability or fitness for any particular purpose. Further, BenQ Corporation reserves the right to revise this publication and to make changes from time to time in the contents hereof without obligation of this company to notify any person of such revision or changes. *Windows, Internet Explorer and Outlook Express are trademarks of Microsoft Corporation. [. . . ] Use [ ] and [ ] to select the setting you want, and then press [SET]. Important!· Higher ISO speeds increase the image noise. To take clean images, use as low an ISO speed as possible. 4. 6. 3 Selecting the Metering Mode Use the following procedure to specify multi-pattern metering, spot metering, or centerweighted metering as the metering mode. Select the "REC" tab, select "Metering", and then press [ ]. Use [ ] and [ ] to select the setting you want, and then press [SET]. Multi (Multi-pattern): Multi-pattern metering divides the image into sections and measures the light in each section for a balanced exposure reading. The camera automatically determines shooting conditions according to the measured lighting pattern, and makes exposure settings accordingly. This type of metering provides error-free exposure settings for a wide range of shooting conditions. Center weighted (Center-weighted): Center-weighted metering measures light concentrating on the center of the focus area. Use this metering method when you want to exert some control over exposure, without leaving settings totally up to the camera. Spot (Spot): Spot metering takes readings at a very small area. Use this metering method when you want exposure to be set according to the brightness of a particular subject, without it being affected by surrounding conditions. Important!· Changing the exposure compensation setting to a value other than 0. 0 changes the metering mode setting to "Center Weighted. " The metering mode changes back to "Multi" when you return the exposure compensation setting to 0. 0. 18 Other Recording Functions BenQ DC 5530 User's Manual 4. 6. 4 Using the Filter Function English The camera's filter function lets you alter the tint of an image when you record it. Select the "REC" tab, select "Filter", and then press [ ]. Use [ ] and [ ] to select the setting you want, and then press [SET]. · Available filter settings are: Off, B/W, Sepia, Red, Green, Blue, Yellow, Pink, Purple Important!· Using the camera's filter feature produces the same effect as attaching a color filter to the lens. 4. 6. 5 Specifying Color Saturation Use the following procedure to control the intensity of the image you are recording. Select the "REC" tab, select "Saturation", and then press [ ]. Use [ ] and [ ] to select the setting you want, and then press [SET]. 4. 6. 6 Specifying Contrast Use this procedure to adjust the relative difference between the light areas and dark areas of the image you are recording. Select the "REC" tab, select "Contrast", and then press [ ]. Use [ ] and [ ] to select the setting you want, and then press [SET]. 4. 6. 7 Specifying Outline Sharpness Use the following procedure to control the sharpness of image outlines. Select the "REC" tab, select "Sharpness", and then press [ ]. [. . . ] · Charge or replace the batteries. · Use only the type of AC adaptor specified for this camera. · Charge or replace the batteries. · Press (REC) to enter the REC mode. [. . . ]