User manual BENQ C630

[. . . ] DC C630 Digital Camera User's Manual Welcome Copyright Copyright 2006 by BenQ Corporation. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system or translated into any language or computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual or otherwise, without the prior written permission of this company. Disclaimer BenQ Corporation makes no representations or warranties, either expressed or implied, with respect to the contents hereof and specifically disclaims any warranties, merchantability or fitness for any particular purpose. Further, BenQ Corporation reserves the right to revise this publication and to make changes from time to time in the contents hereof without obligation of this company to notify any person of such revision or changes. Taking care of your camera · Do not use your camera in the following environmental range: temperature below 0°C or above 40°C. · Do not use or store your camera in the environments listed below: ­ Direct sunlight ­ High and dusty places ­ Next to an air conditioner, electric heater or other heat sources ­ In a closed car that is in direct sunlight ­ Unstable locations · If your camera becomes wet, wipe it with a dry cloth as soon as possible. [. . . ] Press the shutter button all the way down to shoot. Shooting will stop after 3 photos are taken continuously. · In Burst mode, the flash mode will be set to OFF automatically. Using the Camera 3. 3. 8 Auto exposure bracketing (AEB) In this mode, the camera automatically changes the exposure within a set range to take three shots after you press the shutter button once. AEB settings can be combined with exposure compensation settings to extend the adjustment range. Rotate the mode dial to [A], [P], [ [ ] button to turn on your camera. ], [ ], [ ] or [ ], and then press the English 2. Press the shutter button to shoot. · In AEB mode, the flash mode will be set to OFF automatically. 3. 4 Menu options 3. 4. 1 Camera menu This menu is for the basic settings to be used when capturing still images. Rotate the mode dial to [A], [P], [ [ · ] button to turn on your camera. ], and then use [ ] or [ ]/[ ] to select [Mode 1], [Mode 2], or [Mode 3]. In [A] Mode, press [ ] to access menu directly. ], [ ], [ ] or [ ], and then press the 2. Press [ ] to select the desired setting, and then press the OK button. 4. To exit from the menu, press the [ In [A] mode: Item Image Size [ ] Functional Description This option sets the size of the image that will be captured. ­ ­ ­ ­ [ [ [ [ ] 2816 x 2112 ] 2272 x 1704 ] 1600 x 1200 ] 640 x 480 Quality [ Q This option sets the quality (compression rate) at which the image will be captured. ­ ­ ­ [ [ [ ] Fine ] Normal ] Economy ] Using the Camera 9 In [P], [ ], [ ], [ ] or [ ] mode: English 10 Mode 1: Item Image Size [ ] Functional Description Refer to the "In [A] mode:" on page 9. Quality [ Q Refer to the "In [A] mode:" on page 9. ] This option sets the white balance photographing under a variety of lighting conditions and permits photographs to be taken that approach the conditions that are seen by human eye. ­ Auto ­ ­ ­ ­ [ [ [ [ ] Daylight ] Cloudy ] Tungsten ] Fluorescent W. Balance [ WB ] ISO [ ISO ] Mode 2: Item Metering [ ] This option sets the sensitivity for capturing images. When the sensitivity is raised (and the ISO figure is increased), photography will become possible even in dark locations, but the more pixilated (grainer) the image will appear. ­ Auto / 64 / 100 / 200 Functional Description You can select the metering mode that sets which part of the subject to measure to determine the exposure. ­ ­ [ [ ] Center-weighted ] Spot Digital Zoom [ ] This option sets whether the digital zoom will be activated at the time of photography. ­ On / Off This option allows you to display a photographed image on the LCD monitor immediately after you have taken a shot. ­ On / Off Functional Description This option sets the color of the image that will be captured. ­ ­ ­ [ [ [ ] Full Color ] Black & White ] Sepia Quick View [ QUICK ] VIEW Mode 3: Item Color [ ] Sharpness [ ] This option sets the level of image sharpness. [. . . ] Many shots are being captured in dark places, requiring a flash. The battery was not fully charged. Fully charge the battery and disThe battery has not been used for an charge it for at least one complete extended period of time after being cycle before use. The battery or camera The camera or flash was used conis warm. The flash is not available in some modes. [. . . ]