User manual BENQ FP202W

[. . . ] FP202W 20. 1" (51. 1cm) Wide-Screen LCD Monitor User's Manual Welcome i Copyright Copyright © 2006 by BenQ Corporation. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system or translated into any language or computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual or otherwise, without the prior written permission of BenQ Corporation. ii Disclaimer BenQ Corporation makes no representations or warranties, either expressed or implied, with respect to the contents hereof and specifically disclaims any warranties, merchantability or fitness for any particular purpose. Further, BenQ Corporation reserves the right to revise this publication and to make changes from time to time in the contents hereof without obligation of BenQ Corporation to notify any person of such revision or changes. Please follow these safety instructions for best performance, and long life for your monitor iii Power Safety · The AC plug isolates this equipment from the AC supply. · The power supply cord serves as a power disconnect device for pluggable equipment. [. . . ] You could then print it out for reference if you wish to work off-line. When you're ready, Cancel the browser as it is not required for the Windows Upgrade Device Driver Wizard. 2. Launch the Windows Upgrade Device Driver Wizard and click Next. For instructions, see How to install on Windows 2000, ME, & 98 systems on page15. 3. Check the option `Display a list of known drivers . . . ' and click Next. Click the Have Disk button. The Install From Disk window will display. 5. Click the Browse button and navigate to the BenQ LCD Monitor CD-ROM. This is the CD you loaded in step 1 above. The CD Drive will have a Windows designated drive letter (like D: or E: or F:). Select the drive letter corresponding to the drive you put the CD into. 6. Double-click the folder labelled `Driver'. The contents of the `Driver' folder will display. 7. Click the Open button. This will return you to the Install from Disk window, and it will have entered the address to the BenQ LCD Monitor CD `Driver' folder into the field titled `Copy manufacturer's files from:'. The field will contain something like "D:\Driver", or "E:\Driver", or "F:\Driver". 8. Click the OK button. This will return you to the Upgrade Device Driver Wizard. 9. Select (single-click) the file named BenQ FP202W, and click the Next button. Click Next. This will copy the appropriate monitor driver files to your computer. 11. Click Finish. On Windows 2000, this will close the wizard and return you to the Monitor Properties window, now renamed `BenQ FP202W Properties'. Alternatively, on Windows ME and 98, this will return you to the Advanced Display Properties window, skipping the next step. Should you wish to do so, this is where you can change the screen refresh rate and other monitor properties to suit your needs. See How to adjust the screen refresh rate on page19 for details. 12. In Windows 2000, click Close. This will close the BenQ FP202W Properties window and return you to the Advanced Display Properties window. Should you wish to do so, this is where you can change the screen refresh rate and other monitor properties to suit your needs. See How to adjust the screen refresh rate on page19 for details. 13. In Windows 2000, click OK, or in Windows 98 or ME, click Close. This will close the Advanced Display Properties window, and return you to the Display Properties window. Getting the most from your BenQ monitor 16 Should you wish to do so, this is where you can change the screen resolution (area and color). [. . . ] When you choose On and press the Enter key to activate Mode Demo, the display will be divided into two windows; the left window demonstrates images of Standard mode, while the right window presents the images under the specified mode. To return to previous menu, press "Exit. " How to adjust your monitor 30 Input Select: Press the t or u keys to select D-sub (analog) or DVI (digital) input to activate the new settings. Press the Exit key to return to previous menu. Sharpness: Press the t or u keys to adjust the degree of Sharpness. Press the Exit key to return to previous menu. Display Information: Select Display Information to display the current monitor property settings. [. . . ]