User manual BENQ FP567S

[. . . ] BenQ FP567s LCD Color Monitor 15. 0" (38. 1cm) LCD Panel Size User's Manual BenQ LCD Color Monitor User's Guide Copyright Copyright © 2002 by BENQ Corporation (formerly Acer Communications & Multimedia Inc. ). No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system or translated into any language or computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual or otherwise, without the prior written permission of BENQ Corporation. BENQ Corporation makes no representations or warranties, either expressed or implied, with respect to the contents hereof and specifically disclaims any warranties, merchantability or fitness for any particular purpose. Further, BENQ Corporation reserves the right to revise this publication and to make changes from time to time in the contents hereof without obligation of BENQ Corporation to notify any person of such revision or changes. [. . . ] Click "Start" then "Settings". 3. Open the Control Panel and double click on the "Display" icon. English 16 BenQ LCD Color Monitor User's Guide 4. From the "Display Properties" window, select the "Settings" tab. Click the "Advanced. . . " button in the bottom right corner. 5. Select the "Monitor" tab, then click "Properties". English 17 BenQ LCD Color Monitor User's Guide 6. Select the "Driver" tab, then click "Update Driver". 7. The "Upgrade Device Driver Wizard" will pop up. Then click "Next". English 18 BenQ LCD Color Monitor User's Guide 8. Select "Display a list of the known drivers for this device so that I can choose a specific driver" then click "Next". 9. In the next window, click "Have Disk", then "Install From Disk" window will pop up, click "Browse", the "Located File" will pop up. English 19 BenQ LCD Color Monitor User's Guide 10. Scroll down and select your CD ROM Driver, then click "Next. " English 20 BenQ LCD Color Monitor User's Guide 11. In the list of folders within the CD-ROM, select "Drivers" folder then click "Open" twice, then click "OK". Select your LCD Mode (FP567s) from the list in the next window then click "Next" twice. 12. The "Digital Signature Not Found" window will appear, click "Yes", then click "Finish". English 21 BenQ LCD Color Monitor User's Guide 13. The new drivers are now installed on your computer. . English 22 BenQ LCD Color Monitor User's Guide Windows ME To manually install or update the driver, perform the following steps: 1. Click "Start", "Settings", "Control Panel" and then double-click "Display". In the Display Properties window, click the "Settings" tab and click "Advanced. . . ". Click the "Monitor" tab and then click "Change". 4. "Update Device Driver Wizard" dialogue box appears. Choose "Specify the location of the driver (Advanced)" and then click "Next". English 23 BenQ LCD Color Monitor User's Guide 5. Choose "Display a list of all the drivers in a specific location, so you can select the driver you want" then click "Next". 6. Choose "Monitors" from the list, then click "Next". English 24 BenQ LCD Color Monitor User's Guide 7. Choose "Display a list of all the drivers in a specific location, so you can select the driver you want. ". 8. Click "Have disk" and then click "Browse. . . ". 9. Insert "BenQ LCD Monitor's CD" into your CD-ROM and type d:\ (change the driver letter to match your CD-ROM driver if it is not drive D). Enter "Drivers" folder to select the model from the list left. Click "OK". English 25 BenQ LCD Color Monitor User's Guide 10. Click "OK" on the "Install From Disk" window. The dialogue box "Update Device Driver Wizard" appears. Click the "Advanced properties" button in the bottom right corner. English 30 BenQ LCD Color Monitor User's Guide 3. Select the "Adapter" tab. The refresh rate selection field is located in the center at the bottom of the window. 4. 5. Choose a refresh rate from the table with the factory modes, which can be found in the user's guide, and select this in the settings field. In the subsequent windows press "Change", "OK" and "Yes". 6. You can now close "Display Properties". English 31 BenQ LCD Color Monitor User's Guide D. Picture Optimization The easiest way to obtain an optimal picture is by using the ikey function. [. . . ] On the monitor press the "Enter" button and use the "<"or ">"keys to move to the "information" menu. Press "Enter" to "Recall" the preset mode. If the image is still not correct and the OSD also has a fault colour appearance, then one of the three primary colours is missing in the signal input. If any pins are bent or broken off, then contact your dealer or read the chapter, Additional Help, Repairs & Service. [. . . ]