User manual BENQ JOYBEE 110

[. . . ] Joybee 110 (DA-110) Digital Audio Player User Manual Welcome Copyright Copyright 2003 by BENQ Corporation. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system or translated into any language or computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual or otherwise, without the prior written permission of this company. Disclaimer BENQ Corporation makes no representations or warranties, either expressed or implied, with respect to the contents hereof and specifically disclaims any warranties, merchantability or fitness for any particular purpose. Further, BENQ Corporation reserves the right to revise this publication and to make changes from time to time in the contents hereof without obligation of this company to notify any person of such revision or changes. *Windows, Internet Explorer and Outlook Express are trademarks of Microsoft Corporation. [. . . ] or button to scroll to an equalizer mode, Speed You can select from the following play speeds: Veryslow, Slow, Normal, and Speedy. Press or button to scroll to a play speed, and then press the button to select it. Recording The Joybee 110 Digital Audio Player supports built-in microphone recording. The recordable time depends on the bitrate selected and remaining space in the memory. The maximum number for recorded files is 256. Using the Record Function Recording using the built-in microphone 1. Press the MENU button to Record mode and press 3. Press again to pause or long press to stop recording. The recorded file would be saved in the default folder named MICIN and you can find it in Voice mode. Press the MENU button to find Voice mode. You can press the select the file you just recorded and press to play. or button to scroll to When you record using the built-in microphone, this file will be automatically saved in the default folder named MicIn. System Setups Press MENU button to Setting Menu. or button to choose setting item and Using the Joybee 110 Digital Audio Player 9 Recording setups Quality: Here you have four choices to decide the recording quality: High, Mid, Low, and TVF (TVF, mono audio format. Taking up less memory space to extend recording time. ). VOR: If you set VOR on, Joybee 110 Digital Audio Player only starts recording when there's sound signal detected by in-built microphone. Or Joybee 110 Digital Audio Player will start recording whenever you start recording. Exit: Scroll here and press to go back to Setting menu. Setting date and time Press or button to increase or decrease the highlighted digits and press next digits until finish. the display will go back to Setting menu. button to Format flash memory Quick: Executes quick format. Exit: Scroll here and press to go back to Setting menu. Setting Joybee 110 Auto-Off time You can set your Joybee 110 to turn off automatically when in idle mode for different periods of time: Never, 1Min, 3Min, 5Min, 10Min. or button to select and press Setting display backlight duration You can scroll to choose a auto-off backlight duration here: Always Off, 5Sec, 10Sec, 15Sec, 30Sec. Scroll or button to select and press to confirm. Setting display contrast Scroll or button to slide the contrast bar and press to confirm. Setting language There are three languages options to choose: Trad-Chinese (traditional Chinese), Simp-Chinese (Simplified Chinese), English. or button to select and press to con- SW Upgrade Please connect to http://BenQ. com to know more about it. Buttons Lock 10 Using the Joybee 110 Digital Audio Player Long press functions. /A-B to disable the button functions, and long press again to release button Using the Joybee 110 Digital Audio Player as a USB Flash Drive In combination with the USB cable, you can use the Joybee 110 Digital Audio Player as a handy USB flash drive. Connect the Joybee 110 Digital Audio Player using the USB cable. The player will be recognized automatically and there will be a new removable disk icon in the My Computer window. [. . . ] The music files will be copied and become playable using the Joybee 110 Digital Audio Player. How many minutes of MP3 music can be stored in the Joybee 110 Digital Audio Player?It depends on the memory capacity of the player and the compression ratio used in encoding the MP3 files. For MP3 files encoded by MPEG1 Layer3 with a bitrate of 128kbps and sampling frequency of 44kHz (most commonly used), 1MB of memory can store about 1 minute of music. [. . . ]