User manual BENQ JOYBEE 180

[. . . ] Joybee 180 MP3 Player User's Manual Welcome Copyright All rights reserved. No part of this publication may be reproduced, transmitted, recorded, stored in a retrieval system, or translated into any language or computer language, in any form or by any means, electronic, mechanical, recording, photocopying, or otherwise, without the prior permission of BenQ Corporation. Disclaimer BenQ Corporation shall make no warranty or representation, either expressed or implied, with respect to the quality, accuracy or fitness for any particular purpose of this document. The information in this document is subject to change without notice. The content of this manual has been checked and proofread prior to publication. [. . . ] The OLED display is switched off to conserve power and the real time clock is displayed. Press any key to activate the OLED display and exit from the power save mode. 1 minutes to save energy (This function is disabled when Joybee 180 is connected to a PC). and buttons at the same time. · The Joybee 180 turns off automatically when there is no action for · To turn the player off in case of any system problem, long press 22 Transferring data to the Joybee 180 You can transfer your music files to the Joybee 180 using Windows File Manager as well as the QMusic software provided on the software disc. QMusic provides the additional function to enable you to convert your audio CDs into MP3 files and copy them to the player. Transferring data with Windows File Manager 1. Connect Joybee 180 to a PC with the USB cable as described in "Connecting the Joybee 180 to a PC" on page 16. If you already have MP3 (. mp3) or WMA (. wma) files on your hard disk, locate them using the File Manager. Select the desired files and drag them to the new Removable Disk. By doing so, the selected files will be transferred to Joybee 180. 2. 3. · When files are being transferred to the Joybee 180, do not discon- nect the Joybee 180 from the PC. Use the procedure described in "Disconnecting the Joybee 180 from a PC" on page 17 to disconnect it. transferring files to it. · Check that there is enough memory space on the Joybee 180 before Transferring files with QMusic Turn on your Joybee 180 and connect it to your PC using the USB cable provided as described in "Connecting the Joybee 180 to a PC" on page 16. Refer to "Adding music to the Joybee 180 using QMusic" on page 42 for detailed information about transferring files to your player using the QMusic software. 23 Playing MP3/WMA/WAV music files Use the following procedure to quickly start listening to your favorite music on the BenQ Joybee 180 MP3 Player. The player enters the last used mode automatically and displays a list of files if present. Press the MODE button repeatedly to switch to MP3 mode. Press the key to play the current track. Use the or keys to skip to the previous or next tracks. Press and hold down the or keys for 2 seconds to scan in the reverse or forward direction. 7. Press and hold for 2 seconds to stop playback and switch to file list layout mode. Press the buttons to increase or decrease the volume as desired during playback. Pressing the buttons and holding them VOL07 down increases/decreases the volume continuously. The OLED display shows the volume setting when you change the volume. [. . . ] ferring files to Joybee 180. · Check if there is enough memory space on Joybee 180 before trans- 49 Updating Joybee 180 automatically with QMusic You can set up the Joybee 180 to be updated with the music from the My Joybee folder automatically when it is connected to the PC. Click the My Joybee folder in the left panel. 50 2. Press and a dialog box opens to help you to select the desired files. Browse and select MP3, WAV or WMA files to be added to the Joybee 180 from the PC. Press Open to add the selected files to My Joybee. 3. Press on the right panel of QMusic in the function button area. 51 4. In the Option dialog box shown, click the Joybee tab. 52 5. Select Automatically launch QMusic when Joybee added under Launch Settings and Automatically transfer MP3 files to Joybee when added under Update Settings. [. . . ]