User manual BERNEX GB11213 CATALOGUE 2010

[. . . ] 4 Installing your Powerline Adapters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Before you Install . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Connect a Powerline adapter to your router . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Add adapters to your network . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Securing your Powerline Network . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Using the Sync button. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Note: If all of your Powerline adapters are already connected to your Powerline network, they will automatically detected and appear in the list. If not, you will need to add them manually. Device Password (DPW) Connection Quality Speed or Link Rate MAC Address If your Powerline adapter (Local Device) is not detected automatically and does not appear in the list, click Connect to detect and rescan and connect to the Powerline adapter (Local Device) again. Upgrade Firmware Allows you to upgrade the Powerline adapter (Local Device) firmware See page. Scan Rescans the Powerline adapters that are connected to your Powerline network (Remote Device). Close Closes and exits the Powerline Utility application. Rename Renames the listed Powerline adapter (Remote Device). Enter Password ***Allows you to enter the DPW for the listed Powerline adapter(Remote Device)***THIS MUST BE ENTERED FOR ALL DEVICES TO CHANGE THE ENCRYPTION CODE*** Add Allows you to add a Powerline adapter to your Powerline network that is not listed (Remote Device). © Copyright 2012 TRENDnet. 13 TRENDnet User’s Guide Powerline Utility Overview Privacy Window TPL-406E / GB11213 Encryption Key Encryption key for your Powerline network. Note: The default encryption key is HomePlugAV. If you have used the Sync button to change and generate a random encryption key, Unknown Networkname will be displayed. Use Default (Public Network) Replaces the current encryption key value with the default HomePlugAV. Note: You will still need to apply the settings to your Powerline adapters by clicking Set Local Device Only or Set All Devices. Set Local Device Only Changes the encryption key for the Powerline adapter listed as the Local Device on the adapter on the Main window. Note: Match the Device Password (DPW) to the corresponding MAC address. To create a customized encryption key TPL-406E / GB11213 1. In the Powerline Utility Privacy window, under Private Network Name, enter the new encryption key for your Powerline network. 2. After you have entered your new Powerline encryption key, click Set All Devices. 6. If successful, you will receive a message indicating that the password is correct. If successful, you will receive a message indicating that all Powerline adapters were added to your network verifying that the encryption key was changed for all Powerline adapters. Click OK. Repeat steps 2-6 for each additional Powerline adapter listed in Remote Device until you have added all of your remaining Powerline adapters before continuing to the next step “To create a customized encryption key”. © Copyright 2012 TRENDnet. 18 TRENDnet User’s Guide To rename the Powerline adapters Note: Renaming the Powerline adapters (Remote devices) to describe the location of the device will help you to easily identify which Powerline adapter you are monitoring in the utility. In the Powerline Utility Main window, select one of the Powerline adapters listed under Remote Device. Upgrade Firmware TPL-406E / GB11213 Note: The firmware can only be upgraded when your computer is directly connected to the Powerline adapter Ethernet port (also called network port) using an Ethernet cable (also called network cable). The Device Password (DPW) is not required when upgrading the firmware. [. . . ] All products that are replaced become the property of TRENDnet. Replacement products may be new or reconditioned. TRENDnet does not issue refunds or credit. Please contact the point-of-purchase for their return policies. [. . . ]