User manual BERNINA 320

[. . . ] You can also view these values on most Windows computers. Use the number keypad on your remote to enter the Network values. Use the buttons on the remote to move from entry field to entry field. For Wireless Networks 1 2 Make sure the access point you want to connect your player to is turned on. The access point can be a wireless router, modem, etc. Select Wireless (general) in the Network Settings menu, and then press the s button. 5 When done, highlight OK, and then press s button. [. . . ] The player verifies the network connection and then connects to the network. 3 Press the s button. Your player starts scanning for access points. When done, it displays a list of access points it has found. 6 - English 4 Move to the access point you want to connect your player to, and then press the s button. 5-1 If you want to use a fixed IP address, select <IP Settings> on the screen, and then enter the required IP address settings manually. - IP Address - Gateway - Subnet Mask 5 If your network has the Enter Security Key window appears. When done, use the buttons to select Done, press the s button, and then go to Step 6. Press the s button. The player connects to your network. - DNS Server 6 After you have finished configuring the network settings, press the <OK> button. When using a device that supports WPS 2. Follow the instructions displayed on the screen. 1. Perform steps 1 to 5 in "Configuring Your Network Connection: First Steps". Notes - Devices that support WPS have a WPS (PBC) button. 7 - English To Download the AllShare Software Installing and Using AllShare Software on Your PC To use AllShare with your PC or DLNA device, you must install AllShare software on your PC. You can download the AllShare software and get detailed instructions for using AllShare from the Samsung. com website. 6 7 8 9 On the software tab, click the File icon on the right side of the AllShare line. In the pop-up that appears, click Save File. 1 2 3 4 5 Go to www. samsung. com. Find the AllShare install file on your disk, and then double click the file. "Always show pop-up when playback is requested": When selected, AllShare will display playback requests from other devices to My Computer in a pop-up. Always allow : When another device sends a playback request to My Computer, playback is granted without a pop-up notification. Never allow : Devices cannot playback on My Computer. 11 - English Adding Shared Folders You can add a shared folder by doing one of the following: Create A Playlist In AllShare Add playlist : Click on Add new playlist next to Playlist, and enter a name for the playlist. On the File Management screen, click the Shared Folder button at the top of the Device List on the left side, select a folder you want to share from the list that appears, and then click OK. Click File > Add shared folder from My Computer, select a folder you want to share from the list that appears, and then click OK. Click Tools > Settings > Folder Settings > Add Shared Folder. Select a folder from the list that appears, and then click OK on the list, and then again on the Folder Settings tab. Add a File To My Computer's Shared Folder Play on another device : Right-click on the playlist you want to play, and hold the mouse cursor over Play on another device to select the device you want to play the playlist on. Rename a playlist : Rightclick the playlist you want to rename, and then click Rename to rename the play list. You can add a file to a shared folder by doing one of the following: On the File Management screen, in the My Computer's Shared Folder on the right side, click Add files to play to the list. In the file window that appears, select files you want to share, and then click Open. In the window that appears next, click Copy, Move, or Cancel. If you click Copy or Move, the files appear in the File Management screen. [. . . ] If you click Copy or Move, the files appear in the File Management screen. On the File > Add File to My Computer's Shared Folder. In the file window that appears, select files you want to share, and then click Open. In the window that appears next, click Copy, Move, or Cancel. [. . . ]