User manual BERNINA BERNRTTE 340

[. . . ] Downloaded from www. Manualslib. com manuals search engine IMPORTANT SAFETY INSTRUCTIONS! When using an electrical appliance, basic safety precautions should ­ always be followed, including the following: ­ Read all instructions before using this sewing computer. When the sewing computer is not in use, it should be disconnected from the electricity supply by removing the plug from the outlet. 1 To reduce the risk of electrical shock: DANGER 1. An appliance should never be left unattended when plugged in. 2. Always unplug this sewing computer from the electrical outlet immediately after using and before cleaning. To reduce the risk of burns, fire, electrical shock or injury to persons: 1. Do not allow to be used as a toy. Close attention is necessary when this sewing computer is used by or near children and infirm persons. [. . . ]  Press the OK key to start formatting. X  Press the close X key to close the confirmation window without  formatting.  Formatting either the internal memory, the USB Stick or the ATA  Design Card will delete all designs in the corresponding memory or  card. Built-in Memory Built-in Memory Format Built-in Memory ?All the stored data will be All the stored data will be erased. X X Downloaded from www. Manualslib. com manuals search engine 30 Key Operations 1 Hoop Size Selection Choose the default hoop size by pressing the corresponding key. 1 2 3 Note: This selection will only be assigned for monogramming. 2 Auto Stop Activate to have the embroidery computer automatically stop after 5 stitches in order to allow trimming the thread tail. 3 Thread Check Choose OFF to disable the lower thread and upper thread sensor. 4 5 Note: There is an icon (5) shown in the embroidery screen indicating the status of the Thread Check. OFF ON 4 Setting all to default Press the Yes key to return all settings to factory default. Note: The language setting remains unchanged. Português X Press the language tab to get to the Language Selection You can select one of the following 10 languages by pressing the corresponding key: • English • German • French • Spanish • Swedish • Danish • Dutch • Polish • Hungarian • Russian • Portuguese Downloaded from www. Manualslib. com manuals search engine Key Operations 31 On-screen Help You can view on-screen help for the basic operations of the machine. Press the utility key. Press the help key in the utility selection window. Index Changing needles Inserting the bobbin Threading the machine Winding the bobbin ?? Select a help topic by pressing the ?Press the Page keys to scroll through the pages of a help window Note: To close the help window, press the close X key. The illustrated help of the selected topic will be displayed on the screen. Use the page keys to scroll through the pages of the instructions. Press the close X key to go back to the previous display. Downloaded from www. Manualslib. com manuals search engine 32 Key Operations Pattern Selection Window The main screen with the Pattern Selection Window will start automatically when the embroidery computer is switched on. Use this window to open embroidery designs from the following locations: • • • • • Built-in Designs Lettering (integrated or design card with alphabets) Design Cards USB Stick Personal Designs stored in the internal memory of the Deco 340 Read how to open designs from these location on the next pages. Pattern selection window Press one of the five tabs to select the desired category. 1 Open designs from internal memory There are 100 factory built-in designs available. For details of the designs such as size and stitch count please refer to the table in the appendix. This category also allows you to access the Personal Designs which you previously saved into the internal memory. Please refer to the next page («Built-in/Personal key») 2 Open for Lettering / Monogramming There are three fonts for lettering (Gothic, Script and Cheltenham) built into the Deco 340. Further there is a choice of 3- letter and 2- letter monogramming available. Use this selection as well to open fonts from the optional Design Cards with alphabets. 3 Open Designs on Cards Use this category to open embroidery designs from the optionally available Design Cards. [. . . ] 2 The screen contrast has been faded due to a continuous use of the machine. 3 The needle thread is not threaded properly. 4 The defective needle (rusted, burred needle eye) is used. 5 The embroidery hoop is not set properly. [. . . ]