User manual BESTRON AAC5000

[. . . ] Congratulations with the purchase of this Bestron product. These instructions tell you how the product works and how to use it. Read the instructions carefully before you start using the appliance. Only use the appliance in the manner described in the instructions. [. . . ] Easily move the appliance through its rugged wheels. Press the “swing” button to activate to the oscillating function. Press the “on/off” button again to turn off the appliance. Remove the plug from the wall socket after use. 30 EN operation - cooling / Humidifying the air The appliance is equipped with a cooling/humidification system, allowing you to cool and humidify the blown out air. Insert the water tank back into the appliance. Turn on the appliance as described under ‘OPERATION - Ventilation’. Press the “humidifier” button to activate the cooling/ humidi-fication system. The blown out air is now cooled, humidified and cleaned. Press the “humidifier” button again to deactivate the cooling/humidification system. WARNING: • he colder the water you fill the reservoir with, the T colder the blown air. • eplace the water every 3 to 4 days , see ‘CLEANING R AND MAINTENANCE’. 2 operation - purifying the air An optional air purifying filter is included with the appliance as an accessory. This air purifying filter removes small dust and dirt particles from the air and thus improves the air quality in the room. If you want to use the air purifying filter, install it as follows: 1. Remove the intake filter from the back of the appliance (see figure 3). Place the air purifying filter in the filter frame (see figure 4). Reinstall the intake filter into the appliance (see figure 5). WARNING: • When using the air purifying filter, the airflow coming from the appliance decreases. 3 4 5 31 EN Operation - Timer function The appliance is equipped with a timer with allows you to shut off the appliance at the end of a predetermed time. Press the “timer” button repeatedly to set the shut-off time to 1, 2, 4, 6 or 8 hours. Press the “timer” button again to deactivate the timer function. [. . . ] Unscrew the screw at the top of the cooling/humidification system (see figure 7). Remove the cooling/humidifying system from the device.  Bend the fastening points of the white cooling/humidifying curtain slightly outwards to remove the curtain from the cooling/humidifying system (see figure 8). Clean the cooling/humidifying curtain and the other parts under running water. [. . . ]