User manual BESTRON ACH1500S

[. . . ] € Make sure the socket into which you plug the appliance is earthed. €  Make sure that the appliance, the power cord and plug do not come into contact with water. €  Always remove the plug from the wall socket when the appliance is not in use. €  Always remove the plug from the wall socket by pulling on the plug, not on the power cord. [. . . ] Figure 1 Operation - Before first use Remove the device from the packaging and remove all the packaging materials. 16 Instruction manual operation - Use • • • In order to avoid overheating, do not cover the device. The device must not be located immediately below a socket-outlet. Do not use this device in the immediate surroundings of a bath, shower or swimming pool. Place the ceramic heater on a stable surface and ensure that the grilles for the supply and removal of the air are unobstructed. Place the ceramic heater on a stable surface and ensure that the grilles for the supply and removal of the air are unobstructed. Insert the plug into the plug socket (8). The On/Off indicator light (1) will be lit. Use the function dial (3) to select one of the following functions: 0 I Off Cold air Warm air (750Watt) II Hot air (1500Watt) 4. Rotate the thermostat dial (2) towards the right. A click will be heard to indicate that the appliance has been turned on. The temperature is adjusted by turning the thermostat button further. To find the ideal thermostat setting, rotate the thermostat dial clockwise as far as possible. Once the room has reached the desired temperature, slowly rotate the dial anticlockwise until a click is heard. The appliance will then turn itself off. The temperature regulator will ensure that the room remains at the set temperature. Remove the plug from the wall socket and allow the appliance to cool. Clean the exterior of the housing with a damp cloth and rub it dry with a clean cloth. € • • Never immerse the appliance, plug or power cord in water. Never use corrosive or scouring cleaning agents or sharp objects (such as knives or hard brushes) to clean the appliance. Do not use a metal scouring pad to clean the appliance. Fragments of metal could come loose and touch the appliance’s electrical parts causing it to short circuit. [. . . ] The importer can never be held responsible for any consequential loss or damage or any other consequences, resulting either directly or indirectly from the appliance supplied by the importer. n case of claims under guarantee you can contact your dealer where the appliance is purchased. I Bestron offers you also the possibility to send the appliance directly to our Service Department. Do not send your appliance without consulting us. [. . . ]