User manual BIALETTI MOKONA

[. . . ] Thank you for choosing one of our products; we are sure that you will be completely satisfied with your choice. The Bialetti Espresso system is the result of years of enthusiastic, thorough research into coffee and the different ways in which it can be prepared. Since 1933, with the invention and launch of the Moka Express, the little man with moustache has been and continues to be a genuine icon of real Italian espresso. This machine can be used also with original Bialetti capsules: these 100% recyclable aluminium capsules contain the perfect amount of coffee and we have developed them so that they can guarantee you an espresso that tastes like it has been made by a professional in the comfort of your own home. [. . . ] Place the desired filter ("12" for one cup - "13" for two cups) in the fi lter holder (2a) (Fig. Tamp the coffee lightly using the tamper (11) (Fig. Insert the filter holder (2a) into the hub (6) (as illustrated in Fig. H1) and push it to the right until it is in a front-facing position in order to lock it on correctly (Fig. Set one or two cups on the grill (3) (Fig. When using only one cup, center it under both coffee spouts (Fig. If the LED (17a) is off, wait until it turns back on and then press the switch (17) to start the coffee flow. To end the fl ow, press the switch (17) again. Remove the filter holder (2a) from the hub, by pushing it to the left. Place the filter for pods (14) in the filter holder (2a) (Fig. Place the pod (c) in the center of the filter (14) (Fig. M2), making sure that any paper tabs on the pod are placed inside the filter holder. Insert the filter holder (2a) into the hub (6) (as illustrated in Fig. H1) and push it to the right until it is in a front-facing position in order to lock it on correctly (Fig. P1 - P2) and center it under both coffee spouts (Fig. If the LED (17a) is off, wait until it turns back on and then press the switch (17) to start the coffee flow. To end the fl ow, press the switch (17) again. Remove the capsule filter holder (2b) from the hub, by pushing it to the left. Push the lever (k) on the handle in order to open the cover (y) (Fig. Insert the capsule (g) in the capsule filter holder (2b) (Fig. Let go of the lever (k) so as to allow the cover (y) to close over the capsule (Fig. Position the capsule filter holder (2b) in the hub (6) pushing it slightly upwards (as illustrated in Fig. [. . . ] T) due to the fats contained in the foods. This device has been designed in accordance with European directives EC1275/2008 and 2009/125/EC providing provisions for energy-saving mode. This device integrates an energy savings circuit that operates after 15 minutes of inactivity: the machine is turned off and the power consumption is less than 0. To restart the machine it is necessary to press the power switch: the machine will start pre-heating the boiler (red LED flashing) and once it reaches operating temperature, it will indicate the ready state (LED solid). [. . . ]