Detailed instructions for use are in the User's Guide.
[. . . ] Multi-unit Nexia systems can be created utilizing Ethernet and NexLink digital audio linking.
Nexia SP REAR PANEL DIAGRAM
BIAMP SYSTEMS
designed and assembled in the USA www. biamp. com
NexLink Rx Remote Control Bus serial 8 7 6 5 outputs 4 3 2 1
CAUTION
RISK OF ELECTRICAL SHOCK. DO NOT OPEN.
®
FEATURES
C
· Ability · 4 balanced line inputs on plug-in barrier strips · 8 balanced outputs on plug-in barrier strips · Ethernet port for software configuration/control · serial port for third-party RS-232 remote control Nexia BLOCK DIAGRAM control panels · remote control bus for dedicated · NexLink ports for multi-unit system designs · Nexia software for Windows® XP Professional/Vista Remote TCP/IP Control Control · pre-configured I/O with definable processing Comms Bus · mix, route, combine, EQ, delay, control, etc. · RoHS comliance and AES grounding practices · CE marked and UL listed · covered by Biamp Systems' five-year warranty MicroProcessor
R
UL
52SJ
Class 2 wiring
4
3
inputs
2
1
US
LISTED
100-240V~ 50/60Hz 65 Watts, 1. 0 A
term
24VDC @ 0. 5A
hi lo
Ethernet
NexLink Tx
to select, view, and calibrate: - Mixers: standard, automatic, matrix, combiners - Equalizers: graphic, parametric, feedback - Filters: HPF, LPF, high shelf, low shelf, all-pass - Crossovers: 2-Way, 3-Way and 4-way - Dynamics: leveler, comp/limiter, ducker, ANC - Routers: 2x1 ~ 32x32
RS-232 - Delays: 0 ~ 2000 ms
- Controls: levels, presets, logic, RS-232, etc. [. . . ] - Meters: signal present, peak, RMS
- Generators: tone, pink-noise, white-noise - Diagnostics: transfer function
ARCHITECTS & ENGINEERS Memory SPECIFICATION
The DSP speaker processor shall provide four balanced line inputs and eight balanced line outputs on plug-in barrier-strip connectors. Inputs and outputs shall be analog, with internal 24-bit A/D & D/A converters operating at a sample rate of 48kHz. All internal processing shall be digital (DSP). NexLink connections shall allow sharing of digital audio within multi-unit systems. Software shall be provided for creating/connecting DSP system components within each hardware unit. Analog Analog A/D DSP Cluster D/A Available system components shall include (but not be limited to) various forms of: mixers, equalizers, filters, Outputs crossovers, Inputs dynamics/gain controls, routers, delays, remote controls, meters, generators, and diagnostics. Ethernet communications shall be utilized for software control and configuration. Inputs and outputs shall be analog, with internal 24-bit A/D & D/A converters operating at a sample rate of 48kHz. All internal processing shall be digital (DSP). NexLink connections shall allow sharing of digital audio within multi-unit systems. Software shall be provided for creating/connecting DSP system components within each hardware unit. Analog Analog A/D DSP Cluster D/A Available system components shall include (but not be limited to) various forms of: mixers, equalizers, filters, Outputs crossovers, Inputs dynamics/gain controls, routers, delays, remote controls, meters, generators, and diagnostics. Ethernet communications shall be utilized for software control and configuration. After initial programming, processors may be controlled via dedicated software screens, third-party RS-232 control systems, and/or optional remote control devices. [. . . ] After initial programming, processors may be controlled via dedicated software screens, third-party RS-232 control systems, and/or optional remote control devices. Software shall operate on a PC computer, with network card installed, running Windows® XP Professional/Vista. The DSP speaker processor shall be CE marked, UL listed, NexLink NexLink and shall incorporate AES48-2005 Grounding & EMC practices. [. . . ]