Detailed instructions for use are in the User's Guide.
[. . . ] AudiaFLEX provides the same easy-to-use software and functional algorithms, but with far greater flexibility in the choice of I/O configurations. [. . . ] All possible I/O configurations are available with or without CobraNet, ® for multi-device or stand-alone systems. The intuitive software provides audio system design capabilities via PC computer, and allows easy selection, viewing, and calibration of numerous audio components: mixers, combiners, matrixes, equalizers, filters, crossovers, dynamics, routers, delays, remote controls, meters, generators, diagnostics, etc. Once a system design is compiled, it is downloaded into AudiaFLEX, where it can then be controlled via third-party systems such as AMX® and Crestron, ® via daVinciTM software, and/or via dedicated Audia remote control panels.
FEATURES
· · · · · · · · · · · · ·
u pto24inputs/outputs, withorwithoutCobraNet i nput(IP-2), echocanceling(AEC-2HD), telephone ( TI-2), output(OP-2e), &lifier(PA-2)cards i nputandoutputexpanders(8-channel/CobraNet) o n-screendisplayofthetotalaudiodesign c onfiguration/controlviaPC/laptop(Ethernet) t hird-partycontrolviaRS-232orTCP/IP r emotecontrolpanelsforlevels, presets, etc. b uilt-indiagnostictools m ulti-levelsecuritycoding u nlimitedsystemsize RoHScomplianceandAESgroundingpractices C EmarkedandUL/C-ULlisted c overedbyBiampSystems'five-yearwarranty
·
A bilitytoselect, view, andcalibrate: ° Mixers:standard, automatic, matrix, combiners Equalizers:graphic, parametric, feedback ° Filters:HPF, LPF, highshelf, lowshelf, all-pass ° ° Crossovers:2-Way, 3-Way, 4-Way ° Dynamics:leveler, comp/limiter, ducker, ANC ° Routers:2x4~56x56 ° Delays:0~2000ms ° Controls:levels, mutes, presets, schedulers, logicgates, RS-232commands, etc. BiampSystems, 10074S. W. ArcticDrive, Beaverton, Oregon97005U. S. A. (503)641-7287www. biamp. com
AudiaFLEX SPECIFICATIONS
Frequency Response (20Hz~20kHz @ +4dBu): THD+N (20Hz~20kHz @ +4dBu): line level mic level Equivalent Input Noise (20Hz~20kHz, 66dB gain, 150 ohm): Dynamic Range (20Hz~20kHz, 0dB): Maximum Gain (input channels): Crosstalk (channel-to-channel @ 1kHz): line level mic level Output Impedance (balanced): Input Impedance (mic/line balanced): Maximum Output (balanced): Maximum Input (mic/line): +0/-0. 4dB < 0. 006% < 0. 04% -125dBu > 107dB 66dB < -80dB < -75dB 200 ohms 8k ohms +24dBu +24dBu Phantom Power: Input Gain Range (variable trim): Sampling Rate: A/D - D/A Converters: Power Consumption (100~240VAC 50/60Hz): Dimensions: height width depth Weight (max. - fully loaded with PA-2 cards): Compliance: +48 VDC (7mA/input 0dB ~ +66dB 48kHz 24-bit < 150 watts 3. 5 inches (89mm) 19 inches (483mm) 11. 15 inches (283mm) 15. 25 lbs. (6. 9kg)
AES48-2005 Grounding & EMC practices EU Directive 2002/95/EC, RoHS directive CE marked UL / C-UL listed
AudiaFLEX 12x12CM REAR PANEL DIAGRAM
100-240V~ 50/60Hz
Serial Control Port
CAUTION
RISK OF ELECTRICAL SHOCK. DO NOT OPEN.
Installation Instructions: Telephone Interface TI-2
This device must be installed by qualified, trained personnel. [. . . ] Connections to the telephone network must be made with #26 AWG solid copper wire for continued safety.
BIAMP SYSTEMS MODEL TI-2 US:6RMBR00BAUDIATI2 IC:3184A-AUDIATI-2
BIAMP SYSTEMS
designed and assembled in the USA www. biamp. com
150 Watts
In 23
In 21
In 19
In 17
In 15
In 13
In 11
In 9
In 7
In 5
In 3
In 1
primary
CobraNet® connections only
secondary
in use / conductor link / activity LEDs
Out 1 In 24
Out 3 In 22
Out 5 In 20
Out 7 In 18
Out 9 In 16
Out 11 In 14
Out 13 In 12
Out 15 In 10
Out 17 In 8
Out 19 In 6
Out 21 In 4
Out 23 In 2
U. S. [. . . ]