User manual BIAMP ADVANTAGE PM 602 M2-V

[. . . ] WR-1 front 001 Front Panel Display The WR-1 features a backlit display that provides the user with an easy-to-read interface to view the menu options and setup screen. Please note: the display will flash during firmware updates. Select Buttons The two buttons below the Select label are used to choose different functions on the WR-1. The function of these buttons depends on the image that is displayed on the screen. [. . . ] Generally, the image will be the Volume Screen, so the Adjust + and - buttons will generally control the volume of the zone associated with the WR-1. However, when the Page Inhibit Screen is displayed, for example, the buttons will turn this function on/off. Display Views The user can cycle through the screens listed below by pressing the select buttons: Background Source Screen This screen displays the current Source on the top line and the number of defined sources. A label associated with the currently selected background source will be displayed below. If the user presses the adjust buttons while this screen is displayed, the currently displayed audio source will be selected. If one or more local inputs are associated with the zone, they will be automatically added to the selection list. Volume Screen The Volume Screen is the default display screen, which the unit will revert to if a control has not been adjusted for a period of sixty seconds. The LCD shows a number between 0 and 100 in the top right corner, and a bar graphic represents the volume setting. As volume increases, the bar lengthens from left to right and the number increases. At maximum volume, the bar is at full length. The RJ45 connector provides two LEDs that indicate Ethernet link and network activity. 6 WR-1 ReaR VieW This connection carries control data and power over CobraNet. PoE-enabled network switches or PoE midspan adapters must be used to power the WR-1. The maximum distance between any unit and an Ethernet switch is 328 feet (100 meters) when using copper cabling. Additional Ethernet switches and/or fiber-optic cable can be used to further extend distances between units on a network. If other network traffic shares an Ethernet switch with the Vocia network, a managed switch should be used with separate VLANs. The following diagrams illustrate valid network connections for the WR-1. Ethernet switch with PoE Ethernet switch without PoE PoE injector AC Power 7 WR-1 specificatiOns Wall Remote 1 SPECIFICATIONS Connection: Power: RJ45 with shielded Ethernet/PoE cable (Cat5, Cat5e, Cat6, or Cat7) 802. 3af (PoE) Class 1 Dimensions: Front: Height: Width: Depth: Within Wall Height: Width: Depth: Weight 6 inches (153mm) 5. 1 inches (130mm) 0. 6 inches (15. 4mm) 2. 9 inches (73. 5mm) 2. 4 inches (60mm ) 1. 2 inches (30mm) (from front surface). (0. 18kg) ambient Operating temperature Range: Compliance: 32-113 degrees F (0-45 degrees C) EU Driective 2002/95/EC, RoHS directive CE marked Wall Remote 1 Block Diagram LCD Keypad ID Switches Host Processor PoE Vocia System control 585. 0262. 90A 8 WR-1 WaRRanty BIAmP SYSTEmS IS PLEASED TO EXTEND THE FOLLOWING 5-YEAR LImITED WARRANTY TO THE ORIGINAL PURCHASER OF THE PROFESSIONAL SOUND EQUIPmENT DESCRIBED IN THIS mANUAL 1. BIAmP Systems warrants to the original purchaser of new products that the product will be free from defects in material and workmanship for a period of 5 YEARS from the date of purchase from an authorized BIAmP Systems dealer, subject to the terms and conditions set forth below. 2 If you notify BIAmP during the warranty period that a BIAmP Systems product fails to comply with the warranty, BIAmP Systems will repair or replace, at BIAmP Systems' option, the nonconforming product. As a condition to receiving the benefits of this warranty, you must provide BIAmP Systems with documentation that establishes that you were the original purchaser of the products. [. . . ] Such evidence may consist of your sales receipt from an authorized BIAmP Systems dealer. Transportation and insurance charges to and from the BIAmP Systems factory for warranty service shall be your responsibility. This warranty will be VOID if the serial number has been removed or defaced; or if the product has been altered, subjected to damage, abuse or rental usage, repaired by any person not authorized by BIAmP Systems to make repairs; or installed in any manner that does not comply with BIAmP Systems' recommendations. Electro-mechanical fans, electrolytic capacitors, gooseneck microphones, cords connecting handheld microphones, hard-drives, displays, and normal wear and tear of items such as paint, knobs, handles, keypads and covers are not covered under this warranty. [. . . ]