User manual BIAMP ADVANTAGE SYSTEM ONE MODULAR MIXING SYSTEM

[. . . ] All MS-1 units must have a unique Device ID to function properly within a Vocia Paging World (i. e. , it is not possible to have two MS-1 units with the same Device ID of hex 07). To assign a Device ID of hex 07, turn the LSB switch to 7 and leave the MSB switch on 0. To create an ID of hex B7, turn the LSB switch to 7 and turn the MSB switch to B. Device ID switches should be set using a 0. 1 inch (2. 5mm) to 0. 12 inch (3. 0mm) flat blade screwdriver. [. . . ] Network Connection The MS-1 has four RJ45 Ethernet connectors located on the rear panel (Control, Vocia Network, VoIP, and Spare). Each connector has two green LEDs, which display Ethernet Link (left LED) and Activity (right LED). LAN-1 Connector (Control) This port connects the MS-1 to a control network. This should be separate to the LAN that is being used by the CobraNet port either physically or through the use of managed switches and VLANs. The MS-1 can be configured in the Vocia software interface via this port, and as such it should be connected to the same network as the configuration PC during set up. It also supports inter-world paging and communications. LAN-2 Connector (CobraNet) This port is used to communicate with local Vocia devices and as such should be connected to the same network as the local Vocia system. The data from the CobraNet network should be placed on its own LAN, either physically or through the use of managed switches and VLANs. Vocia makes dynamic use of available bundles in CobraNet. Vocia devices are currently not interoperable with non-Vocia devices. LAN-3 Connector (VoIP) The VoIP port is used to host VoIP functionality for the MS-1. Do not exceed the maximum ambient operating temperature of 113 degrees F (45°C). Be aware of conditions in an enclosed rack that may cause the temperature to exceed ambient room conditions. Add-On Features The following features can be supported by the MS-1. Please consult the Vocia Help File for appropriate configuration. Plug-and-Play Replacement The MS-1 acts as a central configuration repository for all locally stored device configuration files. In case another Vocia device fails, a replacement can be connected using the same Device ID settings. The new device will retrieve the appropriate configuration from the MS-1 and set up automatically. Connection of an external PC is not required. Comprehensive Logging and Monitoring The MS-1 records and logs all system activities. The system log can be viewed via the Vocia software and exported using XML. Recorded Message Storage and Playback The MS-1 stores recorded messages for playback. [. . . ] Recorded Message Storage and Playback The MS-1 stores recorded messages for playback. Scheduling of Recorded Messages and Events The message scheduler provides the option of scheduling recurring recorded messages and events. Inter-World Paging Paging between two Vocia worlds is available if each world has an MS-1 in the system. VoIP Paging The MS-1 enables Voice over Internet Protocol (VoIP) access to allow paging from an attached VoIP PBX telephone system. [. . . ]