Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual BIAMP EQ 210-110. We hope that this BIAMP EQ 210-110 user guide will be useful to you.
Lastmanuals help download the user guide BIAMP EQ 210-110.
Detailed instructions for use are in the User's Guide.
[. . . ] To reduce the risk of electric shock, do not perform any servicing other than that contained in the operating instructions unless you are qualified to do so.
Remote Control: Remote level control is available as a user installed option. [. . . ] Remote control capability is added by installing VCA Cards onto the mixer circuit board (see diagram on next page). CAUTION: Turn off and/or dis-connect AC power before performing any modifications. To install VCA Cards, first remove the jumper wires (between OUT and IN) on the respective channels/outputs of the mixer circuit board. Then install the two plastic support/guides (provided with each VCA Card) into the holes provided on the respective channels/outputs of the mixer circuit board (support/guides must be properly oriented to accept VCA Card). A combination of potentiometer and switch may be used, with the switch in line with either the "C" or "+10V" connection. NOTE: When a VCA Card is installed, but no control is connected, signal will not pass. To avoid this circumstance, a jumper wire may be temporarily connected between "+10V" and "C". Additionally, if VCA Cards are removed, jumper wires must be reinstalled between OUT and IN on the respective channels/outputs of the mixer circuit board, before signal can pass.
C +10V
VCA card
Biamp Systems | 9300 S. W. [. . . ] Additionally, if VCA Cards are removed, jumper wires must be reinstalled between OUT and IN on the respective channels/outputs of the mixer circuit board, before signal can pass.
C +10V
VCA card
Biamp Systems | 9300 S. W. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE BIAMP EQ 210-110
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual BIAMP EQ 210-110 will begin.
