User manual BIAMP TTC

[. . . ] ADVANTAGE® TTC Voicecrafter Table Top Controller Operation Manual TM ® Biamp Systems, 10074 S. W. Arctic Drive, Beaverton, Oregon 97005 U. S. A. (503) 641-7287 http://www. biamp. com Jan 12/00 an affiliate of Rauland Borg Corp TTC CONTROL The VOICECRAFTER TTC (Table Top Controller) allows convenient control of the day-to-day operations of the VOICECRAFTER and VOICECRAFTER Plus. [. . . ] The VOICECRAFTER provides the necessary power for the TTC. Preset Recall ­ Recalls up to 5 stored presets (Presets must be stored using PC Control Software, and can NOT be stored via the VOICECRAFTER TTC). Volume ­ Adjusts the user volume up and down. The VOICECRAFTER sets the limits on user volume increase and decrease amounts to ensure that the VOICECRAFTER can adapt to changes. Mute ­ Engages the System Mute Mode (Channel inputs and Main Output is muted). LED flashes amber when VOICECRAFTER is muted, and remains off during normal operation. VCR Mute ­ Mutes and un-mutes the Aux port in VCR mode for switching between Record and playback functions. This button will have no effect if the VOICECRAFTER is in Bridged Mode. Dialing Pad ­ When the 2-wire interface is connected, these numbers (similar to any telephone) allows dialing directly from the VOICECRAFTER Plus. Phone ­ Connects and dis-connects the 2-wire interface. When the red LED is on, the 2-wire connection is made, when the red LED is off, the 2-wire interface is `hung-up'. Hold/Pause ­ Puts the 2-wire interface on hold. This button can be used to put a 2-wire conversation on hold, yet still maintains a 4-wire connection (useful in Video- and Audio-conferencing situations). Pause function is used in speed dialing. [. . . ] This is useful when dialing out of a local PBX. Example: Press and hold Speed Dial button, enter memory location then 9 to get an outside line, then the Hold/Pause button, followed by the number to be dialed. This inserts the necessary delay for the PBX to obtain an outside line. [. . . ]