User manual BIAMP VOCIA INPUT

[. . . ] 2. Flashing green: The unit is receiving power but not data, or the unit has not been configured correctly. 3. Solid green: The unit is operational, has been configured and is receiving PoE. [. . . ] more information on setting IDs and the hexadecimal numbering scheme used in Vocia can be found in the Vocia Help File. Please note: Changes made to the Device ID while connected to the network require a power cycle in order to take effect. All CobraNet routing and bundle assignments are processed by the Vocia devices locally. Vocia makes dynamic use of available bundles of CobraNet. Vocia devices are currently not interoperable with non-Vocia devices. 5 VI-6 rear Panel cOntrOls This connection carries control data, power, and digital audio over CobraNet. The maximum distance between any unit and an Ethernet switch is 328 feet (100 meters) when using copper cabling. Additional Ethernet switches and/or fiber-optic cable can be used to further extend distances between units on a network. please note that CobraNet limits network extensions to seven hops (one-way transmissions) within a network. If other network traffic shares an Ethernet switch with the Vocia network, a managed switch should be used with separate VLANs. All Ethernet wiring is to be done using shielded CAT5, CAT5e, CAT6, or CAT7 cable. VI-6 BIAMP SYSTEMS Designed in Australia Assembled in USA N24138 YEL:in use/conductor GRN:link/act 1 2 +- Input 1 LR Input 3 LR +Input 5 Paging Ports Model VI-6 Control Inputs Device ID GND CobraNet® PoE IEEE 802. 3af Class 0 Control Outputs LR LR Input 4 MSB LSB C NC NO C NC NO 1 2 C NC NO 3 C NC NO 4 3 4 10V (100mA) +- Input 2 +- +- Input 6 1 2 3 4 Ethernet switch with PoE VI-6 BIAMP SYSTEMS Designed in Australia Assembled in USA N24138 YEL:in use/conductor GRN:link/act 1 2 +- Input 1 LR Input 3 LR +Input 5 Paging Ports Model VI-6 Control Inputs Device ID GND CobraNet® PoE IEEE 802. 3af Class 0 Control Outputs LR LR Input 4 MSB LSB C NC NO C NC NO 1 2 C NC NO 3 C NC NO 4 3 4 10V (100mA) +- Input 2 +- +- Input 6 1 2 3 4 Ethernet switch without PoE PoE injector AC Power 6 VI-6 rear Panel cOntrOls Control Outputs The Control Outputs, labeled 1 through 4, are isolated, voltage-free, software-configurable relay outputs. The individual pins are labeled as follows: 1. (NC): normally closed (connected to C when relay is not energized) 3. (NO): normally open (connected to C when relay is energized) Control Inputs The Control Inputs are labeled as follows: 1. [. . . ] BIAmp Systems disclaims all other warranties, expressed or implied, including, but not limited to, implied warranties of merchantability and fitness for a particular purpose. The remedies set forth herein shall be the purchaser's sole and exclusive remedies with respect to any defective product. [. . . ]