Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual BIAMP VOCIA MESSAGE SERVER. We hope that this BIAMP VOCIA MESSAGE SERVER user guide will be useful to you.
Lastmanuals help download the user guide BIAMP VOCIA MESSAGE SERVER.
You may also download the following manuals related to this product:
BIAMP VOCIA MESSAGE SERVER SHEET (936 ko)
Manual abstract: user guide BIAMP VOCIA MESSAGE SERVER
Detailed instructions for use are in the User's Guide.
[. . . ] For more details on software setup, please consult the Vocia Help File.
Message Server
Power Network
Front Panel The MS-1 features one power indication LED on the front panel: 1. Not illuminated: The device is not powered. Flashing green: The unit is receiving power but not data, or the unit has not been configured correctly. [. . . ] An internal universal switching power supply accepts 100~240VAC @ 50/60Hz, with a maximum power consumption of 350 watts. CAUTION: Do not remove or defeat the ground prong on the power cord, as this will constitute a shock hazard. Equipment should be connected to a mains socket outlet with a protective earthing connection. This plug is the main disconnecting device and should remain readily operable. There are no user interchangeable parts. Please contact Biamp Technical Support or your local distributor for all service requirements. USB Ports These ports are inactive at this time. RS-232 Port This port is used to support console access to the MS-1. Settings for connection are as follows: Baud rate 57600, Data bits 8, Parity None, Stop bits 1, and Flow Control Hardware. WARNING: Replacing the Lithium Battery Incorrect replacement of the lithium battery may lead to a risk of explosion. The lithium battery must be replaced with an identical battery or a battery type recommended by the manufacturer. Do not throw lithium batteries into the trash can. They must be disposed of in accordance with local regulations concerning special waste.
6
MS-1 inStallatiOn
Installation The MS-1 requires one 1. 75 inch (44. 45 mm) high and 19 inch (483mm) wide rack space with 17 inch (432 mm) depth. Mounting the unit using four screws with washers will prevent marring of the front panel. When installing the rack ears, please note that the hardware is not symmetrical. Please install the rack ear labeled "left" on the left side of the MS-1 (when looking at the equipment facing the front plate) and the rack ear labeled "right" to the right of the unit. [. . . ] This warranty is in lieu of all other warranties, expressed or implied. BIAMP Systems disclaims all other warranties, expressed or implied, including, but not limited to, implied warranties of merchantability and fitness for a particular purpose. The remedies set forth herein shall be the purchaser's sole and exclusive remedies with respect to any defective product. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE BIAMP VOCIA MESSAGE SERVER
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual BIAMP VOCIA MESSAGE SERVER will begin.
BIAMP VOCIA MESSAGE SERVER SHEET (936 ko)
