User manual BIFINETT KH 1027 ELECTRIC KETTLE

[. . . ] Ensure that the base is completely dry before use, especially if it has accidentally become wet. Only use the water boiler with the supplied base. Make sure that the power cord never becomes wet or damp during operation. Lay the cord such that it cannot be pinched or otherwise damaged. [. . . ] The appliance switches itself off and the control lamps 6 go out as soon as the water is on the boil. First remove the plug from the wall power socket before you lift the kettle from the base 4. This avoids the risk that any water splashing out could come into contact with live electrical connections in the base 4, which could cause a short circuit. Do not consume any water that has already stood in the water boiler for longer than one hour. do not reboil water that has cooled down. For safety reasons, the lid 1 should not be opened while the water is boiling or is very hot. There is a risk of receiving severe scalds. there are no operating elements inside. An open housing can create the risk of a life-threatening electrical shock. Never submerse any parts of the appliance in water or other liquids!This can create the risk of a life-threatening electrical shock if residual liquid comes into contact with powered components. Press from the front against the upper lug sitting in the middle of the pouring sieve 8 and at the same time hold it firmly by the flap. Clean the pouring sieve 8 with a lightly moistened dishcloth and under running water. After cleaning it, place the pourer sieve 8 from inside against the opening. Should the scale deposits in the pourer sieve 8 be firmly settled, lay it in a water-vinegar solution, with a ratio of 6:1, for a few hours. the scale deposits will dissolve themselves. Rinse the pourer sieve 8 with lots of clear water. First, remove the plug from the power socket and allow the appliance to cool down completely. Clean the exterior surfaces and the power cable with a slighly damp cloth. Be sure to dry the appliance well before taking it back into use. For stainless steel surfaces, you can use appropriate cleaning agents from a specialized dealer. Never use any cleansers, abbrasive substances or solvents. [. . . ] In the event of a warranty claim, please make contact by telephone with our Service Department. Only in this way can a post-free despatch for your goods be assured. The warranty covers only claims for material and manufacturing defects, not for worn parts or for damage to fragile components, e. This product is for private use only and is not intended for commercial applications. [. . . ]