User manual BIFINETT KH 1128 TOASTER

[. . . ] · Use in commercial or industrial environments. · After use, always remove the power plug from the wall socket. This prevents the unintentional switching on of the appliance. · Ensure that the power cable never becomes wet or moist when the appliance is in use. Place the power cable such that it cannot become jammed or otherwise damaged in any way. [. . . ] This applies especially if you use it in the kitchen and close to the sink. · If the supply cord is damaged, it must be replaced by the manufacturer or its service agent or a similarly qualified person in order to avoid a hazard. · Always completely unwrap the power cable from the retainer at the base of the toaster when using the appliance. Press the bread carriage it engages. The light down until glows. Appliance Description Bread roll holder Bread carriage STOP button with integrated light Toasting dial Crumb tray Power cable Bread roll holder button The appliance then heats itself to its maximum temperature. As soon as the maximum temperature is reached, the bread carriage returns to the top automatically. The light extinguishes and the appliance switches itself off. Press the STOP button to interrupt the heating process. The bread carriage then returns to its upper position, the light extinguishes and the appliance switches itself off. Taking into use Before taking the appliance into use ensure that . . . - the appliance itself, the power cable and the plug are in a serviceable condition, and . . . - all packaging materials have been removed from the appliance. Caution: Do not lift the bread carriage by hand during the toasting process. This may damage the mechanism. Remove the power plug from the power socket and allow the appliance to cool down. Clean the appliance as described in the chapter "Cleaning and Care". First of all, clean the appliance as described in the chapter "Cleaning and Care". Completely unwrap the power cable from the retainer at the base of the toaster and lead it through one of the cable clasps on the side of the appliance. Then heat the appliance up a couple of times to remove production residues from the heating coils. It is to be considered as normal should a slight odour be created by this: To do this, insert the plug into the wall socket and set the toasting dial to "7". Toasting Place the slices of bread into the bread carriage. Turn the toasting dial to the desired setting and . . . press the bread carriage down until it engages. As soon as the bread is toasted the bread carriage returns to its upper position automatically. The light extinguishes and the appliance switches itself off. -4- Press the STOP button to interrupt the toasting process. The bread carriage then returns to its upper position, the light extinguishes and the appliance switches itself off. Caution: Bakery products can burn!Clean the toaster after every usage to prevent flammable crumbs from accumulating. Clean all outer surfaces and the power Warming bread rolls Press the bread roll holder button downwards. Place the bread rolls on it and start the toasting process as described in the chapter "Toasting". Thereby, adjust the toasting dial to a maximum level of 7. [. . . ] Store the appliance in a dry location. First, remove the power plug from the wall socket. Remove all residual crumbs. -5- Disposal Under no circumstances may the appliance be disposed of with normal household waste. Dispose of the appliance through an approved disposal centre or at your local waste facility. Observe the currently applicable regulations. [. . . ]