User manual BIFINETT KH 600 AUTOMATIC TEA AND COFFEE MAKER

[. . . ] Switch off the device (press the switch "0") before you open the lid. The Bifinett tea and coffee maker has an integrated safety system. This automatically switches the device off again if the device has been switched on with no water in it. If this occurs, pull out the mains plug and let the heating element cool before you refill the device with water. [. . . ] Switch on and then wait for the automatic switch-off. Your tea and coffeemaker is now ready for use. Please read carefully through all advice and instructions. Warning: Do not put any sugar in the tea and coffee maker. Do not heat milk in the tea and coffee maker. OPERATION 1 2 3 4 Take the carafe off the base. Take the lid off the glass carafe and remove the brewing system. The brewing system can be placed down on a level surface. Fill the glass carafe with the required amount of water. This can be between a minimum of 0. 3 l and a maximum of 1. 0 l of water. The respective filling marks can be found on the outside of the carafe. Warning: So as to avoid the risk of burns and electric shock, please ensure that no water overflows from the carafe. To open, turn the lid anti-clockwise whilst holding the brewing chamber (see Fig. Place the required amount of coffee, tea or teabags into the brewing chamber. Do not fill the coffee or tea above the marks inside the brewing chamber. Refer to the instructions in the section `Making tea and coffee'. Put the lid back on and lock it in place by turning it to the right whilst holding the brewing chamber. Place the brewing chamber back in the carafe. Make sure that the water outlet pipe is securely seated in the heating element opening. 5 6 7 8 Switching on the device WARNING: Do not place the device on the main unit until you have filled it with water. Place the carafe on the base and push the plug into the mains socket. Switch on the device by pressing switch "1". The red indicator light comes on and the brewing process begins. 5 Switching off the device If you wish to cancel the device heating up, press switch "0". The brewing process lasts between 7 and 12 minutes depending on the amount and temperature of the water used. [. . . ] Before cleaning, always remove the plug from the socket and allow the device to cool. Clean the insides of the tea and coffee maker with a moist cloth and the plastic parts with a damp sponge. Clean the brewing chamber and the lid with warm water and a little washing-up liquid. Never immerse the tea and coffee maker, the cable or the plug in water. [. . . ]