User manual BIKEMATE MCP 30102

[. . . ] MCP 30102 Caution: Do not install the magnet on the same position as the transmitter. The ideal mounting points are in the lower, or in the upper half of the transmitter (Please see picture 5). Attaching the Computer (See Picture 6) After installing the holder, sensor and magnet, you can attach the computer. Insert the computer into the computer holder turned approx. [. . . ] The batteries, straps, and glass are not included under this warranty. Once the guarantee has expired you can still send your product in to be repaired, however you will be liable for the costs. The guarantee is void if the product has been misused or mistreated in any way and or has been repaired by anyone other than our service centre. Your statutory rights are not affected in any way. Technical Data Battery: CR 2032 Protected against water splashes MCP (Multi Consumer Products) AG, Rudolf-Diesel-Straße 9, D-61267 Neu-Anspach, Germany oder / or + 3 / oder or Minimum and Maximum Temperature, Adjustable Timer, Current Calorie, Adjustable Trip Distance and Scan-Mode can be added or removed at your choice . Please press theM-II-Button to display the following functions: CLOCK TRIP RIDET AVSPD MAXSPD ODO CAL SCAN KCAL KM+ To display the single functions please press the buttons M-I and M-II. Menu Time and Stopwatch Your BIKEmate bicycle computer can be used for regular time display as well as for stopwatch mode. Menu Temperature The temperature measurement and temperature memory features allow you to read off and record different temperatures (Current, Minimum and Maximum Temperatures) during a trip, such as occur over greatly varying altitudes. Trip Distance and Trip Time Menu The trip mileage and trip time features help you to organize your bicycle trip optimally and keep a record of your trips. Please note that the delete function for this data also affects the other data logged for the trip!Menu Average and Maximum Speed The Average speed feature allows you to calculate your anticipated time of arrival during a trip. If you keep a training log, this value is also suitable for recording your training achievement. Menu Odometer The Odometer feature of your bicycle computer accumulates all ridden and preset kilometres. + 4 max. You can operate your BIKEmate bicycle computer simply 6. 2 Confirm by pressing the M-I button. SET 6. 3 MXTEMP. To activate the function Maximum Temperature choose on (activated) by pressing M-II. Description of the Buttons SET 10. 6 If you activated all additional options the menu circle is as follows : Separate functions can be displayed by pressing M-I: CLOCK -> STW -> TEMP°C -> MNTEMP -> MXTEMP > FAT - > TIME + Separate functions can be showed by pressing M-II: 15. 7 - 15. 8 Holding down the S button for approx. 2 seconds deletes all data stored in the computer for the current trip. Beware : Please note that the delete function for this data also affects the other data logged for the trip (Tripdistance, Ridingtime, Average and Maximum speed, Calories, Fatburn, Maximum and Minimum Temperature). 15. 9 Press M-IIto display the maximum speed of the current trip. 15. 10 - 15. 11 Menu Maximum Speed - Holding down the S button for approx. 2 seconds deletes all data stored in the computer for the current trip. Beware : Please note that the delete function for this data also affects the other data logged for the trip (Tripdistance, Ridingtime, Average and Maximum speed, Calories, Fatburn, Maximum and Minimum Temperature). [. . . ] 9. 6 Now the bicycle computer is ready to go and displays 15. 0 Menu Trip distance and Riding time- Press the time. Press M-Ior M-IIto choose between the 4. 0 Basic Settings Odometer- Press M-IIto start M-II in the clock mode to switch to the Tripdistance. 15. 1 - 15. 2 Holding down the S button for approx. 2 10. 0 Basic Settings and Additional Options 4. 1 Set the value of the first digit by pressing M-II. [. . . ]