User manual BINATONE IDECT X3 SYSTEM

[. . . ] USER GUIDE iDECT X3 System Colour Display Telephone with 200 Name and Number Phonebook and SMS messaging THIS EQUIPMENT IS NOT DESIGNED FOR MAKING EMERGENCY TELEPHONE CALLS WHEN THE POWER FAILS. ALTERNATIVE ARRANGEMENTS SHOULD BE MADE FOR ACCESS TO DIAL EMERGENCY SERVICES. UK (BTP) Ver 1, March 2007 Before operating this set, please read these instructions carefully. Important noteThis telephone is not designed for Emergency calls when the main power fails. For Emergency calls you should have a basic phone that does not need mains power, connected to your line so that you can make calls during a power failure. iDECT Helpline 0845 345 9677 (for UK only) Monday to Friday from 9:00am to 5:00pm **Please note that all calls are charged at local rate Or visit our website: www. idectonline. com Charging batteries for the first time Before you start to use your telephone make sure that all batteries are fully charged for 24 hours. Unpacking your phone In the box you will find: the cordless handset (two handsets with a Twin system, three with a Triple system, four with a Quad system and five with a . . . . . . ) the base unit One 2. 4V 600mAh rechargeable battery pack and a battery compartment cover for each handset a telephone line cable for the base unit a mains power lead, and DC 7. 5V 480mA adapter for the base unit charger pods, each with a separate mains power lead and DC 7. 5V 480mA adapter, for multi-handset system User Guide ** Keep your sales receipt as it is your guarantee Where to find it Colour Display with backlight Left Soft/ Menu Access button Press access menu. Press for OK. What's on the display? EAR PIECE Right Soft/ Phonebook button Press to store names and numbers. [. . . ] à The display show Registration > Register Handset. Use the UP/ Press the Use the UP/ bases. or DOWN/ button to stroll through the different button to select Select Base. Once you have selected the base you want to register the handset to the base, press the button to select. Base 1) à The display show Registered to Base. * The display will go back to idle mode if the handset search to base is successful. * AUTOMATIC to let the handset search for the nearest free base unit. 26 SMS text messaging You can send and receive up to 35 standard SMS messages with a maximum of 160 characters, or up to 8 messages with up to 612 characters. Set terminal number 1 2 3 4 5 6 7 8 Press the MESSAGE button. à The display shows SMS >New Message. Use the UP/ or DOWN/ button to select Settings. à The display shows Settings > Service Centres. Use the UP/ or DOWN/ button to select Terminal Number. à The display shows Terminal Number. (Default is 9) Use the UP/ or DOWN/ terminal number. button or KEYPADS to enter the Press the button for OK. Press the HANG UP/C button to go back to idle mode. iDECT Help Line(for UK only): 0845 345 9677 (Local Call rate) 27 Set SMS alert 1 2 3 4 5 6 Press the MESSAGE button. à The display shows SMS >New Message. Use the UP/ or DOWN/ button to select Settings. à The display shows Settings > Service Centres. Use the UP/ or DOWN/ button to select SMS Alert. à The display shows Set Alert >Off. Use the UP/ or DOWN/ button to choose Off, On or Set Alert. *If you select Set Alert, there are three tones to choose from (Morse, Discreet and Polyphonic. ) Use the UP/ or DOWN/ button to choose tone. 7 8 9 Press the button for OK. [. . . ] Do not use non-rechargeable batteries in your iDECT X3 they may burst, causing damage. If the fault persists. . . Disconnect all other instruments connected to the same line as the iDECT X3 and try to make a call. Disconnect the base unit from the telephone line and plug a different hone into the master telephone socket. If the call does not work, and you are using a two-way socket adapter, remove it and plug a telephone directly into the socket. If the call now works, the adapter may be faulty. [. . . ]