User manual BINATONE IDECT X3I SYSTEM

[. . . ] USER GUIDE iDECT X3i System Colour Display Telephone with 200 Name and Number Phonebook and Answering Machine and SMS Messaging THIS EQUIPMENT IS NOT DESIGNED FOR MAKING EMERGENCY TELEPHONE CALLS WHEN THE POWER FAILS. ALTERNATIVE ARRANGEMENTS SHOULD BE MADE FOR ACCESS TO DIAL EMERGENCY SERVICES. UK (BTP) Ver 2, Jun 2007 Before operating this set, please read these instructions carefully. Important noteThis telephone is not designed for making Emergency calls when the main power fails. For Emergency calls you should have a basic phone that does not need mains power, connected to your line so that you can make calls during a power failure. iDECT Helpline 0845 345 9677 (for UK only) Monday to Friday from 9:00am to 5:00pm **Please note that all calls are charged at local rate Or visit our website: www. idectonline. com Charging batteries for the first time Before you start to use your telephone make sure that all batteries are fully charged for 24 hours. Unpacking your phone In the box you will find: the cordless handset (two handsets with a Twin system, three with a Triple system, four with a Quad system and five with a Quin system) the base unit One 2. 4V 600mAh rechargeable battery pack and a battery compartment cover for each handset a telephone line cable for the base unit a mains power lead, and DC 7. 5V 600mA adapter for the base unit charger pods, each with a connected mains power lead and DC 7. 5V 480mA adapter, for multi-handset system User Guide ** Keep your sales receipt as it is your guarantee Where to find it Colour Display with backlight Left Soft/ Menu Access button Press to access menu. Press for OK. EARPIECE Right Soft/ Phonebook button Press to access phonebook menu. [. . . ] à The display shows Settings > Service Centres. or DOWN/ button to select Receive Centre. Press the button. à The display shows Receive Centre. (Default: 080058752) Press the button to clear number. Use the keypad to enter the new service centre number. Press the HANG UP/C button to go back to idle mode. iDECT Help Line(for UK only): 0845 345 9677 (Local Call rate) 27 Set sending centre number 1 2 3 4 5 6 Press the MESSAGE button. à The display shows SMS >New Message. Use the UP/ or DOWN/ button to select Settings. à The display shows Settings > Service Centres. or DOWN/ button to select Sending Centre. Press the button. à The display shows Sending Centre. (Default: 1470P17094009) Press the button to clear number. 7 8 9 10 Use the keypad to enter the new sending centre number. Press the HANG UP/C button to go back to idle mode. Selecting message size 1 2 3 4 5 6 7 Press the MESSAGE button. à The display shows SMS >New Message. Use the UP/ or DOWN/ button to select Settings. à The display shows Settings > Service Centres. Use the UP/ Press the Use the UP/ Chars. or DOWN/ button to choose 612 Chars or 160 button to select Message Size. Press the button for OK. Press the HANG UP/C button to go back to idle mode. 8 28 Write and send a message 1 2 3 Press the MESSAGE button. à The display shows SMS >New Message. Enter the text message using the alphanumeric keypad. Press the number key corresponding to your desired alphabet (see Memory phonebook management for keys). [. . . ] Disconnect the base unit from the telephone line and plug a different hone into the master telephone socket. If the call does not work, and you are using a two-way socket adapter, remove it and plug a telephone directly into the socket. If the call now works, the adapter may be faulty. If you cannot make a call, the fault may be on the exchange line. [. . . ]