User manual BINATONE STYLE 1200

[. . . ] Phone Function Keys U U EARPIECE U What's on the display? The display of your telephone contains one line of text (showing details of names and numbers) and two lines of icon Display U UP and DOWN button Press to scroll through the list of stored numbers Press during programming to move through the menu Press during a call to change the volume in the earpiece U U U CALLER ID (CID) button Press to view caller ID list PHONEBOOK button Press to store names and numbers Press to access phonebook U Mains power connection Battery safety Installation and Set-up U 5 5 5 What the symbols mean? Signal Level Call Battery Charge Level Intercom Call Phonebook Caller Display Ringer Off Redial This shows that there is signal between the handset and its base. If it flashes, it means that there is no signal. This shows when somebody is using the telephone. It flashes while your handset is ringing for an incoming call. [. . . ] Press the PHONE/OK button to confirm Press and hold the HANG UP/C button to go back to idle mode C Turn on/off key tone Press MENU button , the display shows "PHONEBOOK" Press the DOWN button four times , the display shows "HANDSET" Press the PHONE/OK button , the display shows "H/S NAME" MEN U OK OK Press the DOWN button once , the display shows "KEYTONE " (ON) Press the PHONE/OK button to turn key tone on( ) or off(X). Press and hold the HANG UP/C button to go back to idle mode C Base ringer volume and melody Change base ringer volume Press MENU button , the display shows "PHONEBOOK" Press the DOWN button three times, the display shows "BS RINGER" MEN U OK 10 OK OK Press the PHONE/OK button , the display shows "BS VOLUME" Press the PHONE/OK button, the display shows "VOLUME2 " Use the UP/DOWN button to adjust volume. There are three levels. Press the PHONE/OK button to confirm Press and hold the HANG UP/C button to go back to idle mode Guarantee and service The Binatone Style1200/1210 is guaranteed for 12 months from the date of purchase shown on your sales receipt. This guarantee does not cover any faults or defects caused by Style 1200/1210 Stylish Digital Cordless Telephone Digital Cordless Telephone with Caller Display, Name and Number Phonebook and Answering Machine (Style 1210 only). Unpacking your phone In the box you will find: the cordless handset (two handsets with a Twin system, three with a Triple system and four with a Quad system) the base unit, with attached mains power lead and adapter rechargeable batteries and a battery compartment cover for each handset a telephone line cable for the base unit charger pods, each with an attached mains power lead and adapter, for multi-handset system ** Keep your sales receipt as it is your guarantee OK C accidents, misuse, fair wear and tear, neglect, faults on the telephone line, lightning, tampering with the equipment, or any attempt at adjustment or repair other than through approved agents. Please keep your sales (till) receipt ­ this is your guarantee. You should also keep the original packaging material. In the unlikely event that you need to return your Style1200/1210 to our Repair Centre while it is under guarantee, there will be a £5 handling charge. U SER G U I D E Change base ringer melody Press MENU button , the display shows "PHONEBOOK" Press the DOWN button to select "BS RINGER" MEN U OK OK OK C Press the PHONE/OK button , then Press the DOWN button to select "BS MELODY" Press the PHONE/OK button , the display shows "MELODY 1" Use the UP/DOWN button to change the melody. Press the PHONE/OK button to confirm Press and hold the HANG UP/C button to go back to idle mode While the unit is under Guarantee 1. Disconnect the base unit from the telephone line and the mains electricity supply 2. Pack up all parts of your Style1200/1210, using the original packaging. Remember to include the mains adapter 3. Return the unit to the shop where you bought it, making sure you take your sales receipt. Using a multi-handset system Make intercom calls Press the INTERCOM button on any handset (i. e. handset 1). " IN T The intercom icon INT will appear, e. g. Use the digit buttons to press the handset number 2 you want to call, and the display shows e. g. Handset 2 will ring On the handset being called, press the PHONE/OK button to answer and the intercom icon `INT' will appear on the display e. g. "INT 1" Press the HANG UP/C button to end the call OK After the Guarantee has expired If the unit is no longer under Guarantee, first follow steps 1 and 2 as for repair under Guarantee. Call our Service Department on 0845 345 9677 and ask for a quotation of the repair charge and details of where to send your Style1200/1210 for repair. Make sure you include with your Style1200/1210: Your name and address A cheque or postal order for the value of the repair charge 5. Return your Style1200/1210 to the address given by the Service Department. * This does not affect your statutory rights. C Transfer intercom calls When one handset is on an external call and wants to transfer the call to another handset Press the INTERCOM button on the handset on the external call(i. e. handset 1) IN T The intercom icon I N T would appear e. g. "INT 2" Use the digit buttons to press the handset number you want to transfer the call to (the external line will be on-hold at this moment) Handset 2 will ring Press PHONE/OK of handset 2 to answer the intercom call Press HANG UP/C button on handset 1 to transfer the call to handset 2 OK Technical details Standard Digital Enhancement Cordless Telecommunication (DECT) Frequency range 1. 88 to 1. 9 GHz (bandwidth = 20 MHz) Channel bandwidth 1. 728 MHz Operating range Up to 300m outdoors; up to 50m indoors Operating time Standby: 80 hours Talking: 8 hours Battery charge time: 15 hours Temperature range Operating 0 ºC to 40 ºC Storage -20 ºC to 60 ºC Electrical power HANDSET ­ 300mAH NiMH rechargeable battery pack. Base UNIT/CHARGER POD ­ input 230V 50Hz 30mA; output DC7. 5V 300mA 2. 25VA Port specification The port (connected to the telephone line) is a TNV port with respect to EN41003. Binatone Helpline (for UK only) Monday to Friday from 9:00am to 5:00pm Tel: 0845 345 9677 **Please note that all calls are charged at local rate Or visit our website: www. binatoneonline. com Charging batteries for the first time Before you start to use your telephone make sure that all batteries are fully charged for 15 hours. Important note: This telephone is not designed for Emergency calls when the main power fails For Emergency calls you should have a basic phone that does not need a mains power, connected to your line so that you can make calls during a power failure. Shuttle between two calls IN T When an external call and an intercom call are in progress at the same time you can shuttle between the two calls by pressing the INTERCOM button on your handset. Set up a three-way conference You can have a three-way conference when you are on a call with an external line IN T When you are on the phone press the INT button Press the handset number you want to join the conference. [. . . ] Move closer or your call may be cut off. Check the Battery Level symbol on the display. If it's low, recharge the batteries. You need to subscribe to the Caller Display feature from your network service provider. [. . . ]