User manual BIONAIRE BAP1250-CN

[. . . ] When using electrical appliances, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and injury to persons, including the following: · Read all instructions before using appliance. If the filter is covered by a bag when shipped: remove plastic bag before use. ⷠKeep the cords out of heavy traffic area. To avoid fire hazard NEVER put cords under rugs, near heat registers, radiators, stoves or heaters. [. . . ] This includes things like smoke, dust, pollen, ragweed, grasses, mold spores, dust mite debris and pet dander. carbon Filter Indicator ­ When the carbon filter indicator light turns red it is time to change the carbon filters. HEPA Filter Indicator ­ The filter life monitor uses a series of lights to give you an indication of the remaining filter life. With new filters the bottom light will be illuminated green. As the filter life progresses the filter life indicator will move to yellow and your HEPA filters should be checked for particulate accumulation. When the filter life indicator light is red, it is time to change the HEPA filters. enviroCheckTM Wireless Air Quality Center ­ Multifunctional providing an indoor air quality display , auto mode , programmable controls , remote operation of air cleaner as well as a clock and alarm mode. Air Quality Sensor ­ Uses an advanced infrared optical system to constantly detect tiny airborne particles in the air around the EnviroCheckTM Wireless Air Quality Center, such as pollen and dust. It displays the air quality conditions using a series of LED lights glowing red when high levels of particles are present and green when air quality is improved. The hour L numbers will begin to flash and a small bell will appear in the bottom right hand corner of the LCD screen. When a button has not been pressed for a few seconds OR when the "SET" button is pressed again, the minute numbers will begin to flash. Press the "+" and "-" buttons to adjust the minutes as indicated above in step 2. When a button has not been pressed for a few seconds OR when the "SET" button is pushed again the time will appear on the LCD screen and the alarm is set. A small bell will now appear in the bottom right hand corner indicating the alarm is operational. When the alarm goes off, a rapid beeping will be heard. The bell in the right hand corner will disappear. The longer the alarm sounds the louder it gets. Press the "ALARM" button when the alarm is sounding and the alarm will turn off. After 10 minutes, the alarm will sound again. The alarm will continue to go off every 10 minutes until the alarm mode is deactivated. Instruction Leaflet INFO-LINE If after having read this leaflet, you have any Questions or comments on your air cleaner, call 1-800-253-2764 in North America. The air cleaner will begin to beep continuously until it is synchronized with the EnviroCheckTM Wireless Air Quality Center. [. . . ] If you are returning the unit more than 30 days after the date of purchase, please see the enclosed warranty. Should your Air Cleaner require service, please call 1-800-253-2764 in North America for further assistance. If you have any other questions or comments, feel free to write to us: Consumer Service Department 32B Spur Drive El Paso, TX 79906 Visit our website at www. Operation is subject to the following two conditions: 1. [. . . ]