User manual BIONAIRE BAP336

[. . . ] BAP33605EM2. qxd 10/14/05 9:27 AM Page 1 TROUBLESHOOTING Problem System will not operate Solution · Confirm that the unit is plugged into a working electrical outlet. · Confirm that the Damper Switch (1) is in the ON position. · Check to make sure the system is on by pressing the Mode Button (2). · Make sure that all bags have been removed from the filters. [. . . ] · Keep the cord out of heavy traffic areas. To avoid fire hazard, NEVER put the cord under rugs, near heat registers, radiators, stoves, or heaters. · To protect against electrical hazards, DO NOT immerse in water or other liquids. · Close supervision is necessary when any appliance is used by or near children, or disabled persons. · Avoid contact with moving parts. · Always unplug the product before moving it, opening the grill, changing the filters, cleaning, or whenever the product is not in use. Be sure to pull by the plug and not the cord. · NEVER drop or insert any object into any openings other than instructed in this manual. · DO NOT operate any appliance with a damaged cord or plug, if motor fan fails to rotate, after the appliance malfunctions, or if it has been dropped or damaged in any manner. Return appliance to manufacturer for examination, electrical or mechanical adjustment, or repair. · Use appliance only for intended household use as described in this manual. Any other use not recommended by the manufacturer may cause fire, electric shock, or injury to persons. The use of attachments not recommended or sold by JCS/THG, LLC may cause hazards. · NEVER block the air openings, grills/outlets or place objects that would cause blockage of the air intake/exhaust openings. · Keep unit away from heated surfaces and open flames. · DO NOT attempt to repair or adjust any electrical or mechanical functions on this unit. Doing so will void the warranty on serviceable parts. All servicing should be performed by qualified personnel only. · WARNING: To reduce the risk of fire or electric shock, DO NOT use this product with any solid-state speed control device. · Install horizontally only in a double hung window as described in this manual. · All filter servicing should be performed from inside the room. Outside filters should be serviced by first sliding the unit out of the Window Sealing Frame and into the room. [. . . ] Figure 16 b) The window sash is firmly closed against the foam strip Window Sill Insullation on top of the Window Sealing Frame. c) The locking clamp tightly grips the window sash. d) The foam blocks are tightly sealed against the window frame. e) If used, the window sill J-Hooks are secured to the window sill. [. . . ]