User manual BIONAIRE BASF 1714

[. . . ] This product is intended for household use ONLY and not for commercial or industrial applications. Turn the base cover upside down and place the round weighted insert into the base cover. Insert the threaded end of the L-shaped locking lever into the hole of the washer, round weighted insert and through the base cover. Whilst holding the base cover and round weighted insert with one hand, connect the pole to the base, sliding the L-shaped locking lever into the bottom of the pole with you other. [. . . ] Insert the pole locking knob (L) into the hole on the outer pole, to securely hold this position. Place the fan head assembly into this extension pole, inserting the neck of the fan into the pole opening. Turn the fan head's neck until the head is securely locked into place. Tighten when the fan head is in your desired position. Converting to a table fan Model BASF1314 only: On model BASF1314 an additional short pole (R) is supplied which allows the fan to be converted into a table fan. To change to this short pole, remove the fan head assembly from its position on top of the inner pole and unscrew the L-shaped locking lever at the base. Remove the long pole, replace with the short pole and reassemble as detailed above. ADJUSTMENT Tilt adjustment Follow these instructions to tilt the fan head for upward angle air movement. To change the tilting angle of the fan head, simply loosen the tilt adjustment knob (J) 2. Move the fan head to the desired angle, then firmly tighten the knob to lock in place. CLEANING AND MAINTENANCE Follow these instructions to correctly and safely care for your Bionaire® fan. please remember:· Always unplug the fan before cleaning or assembly. Do not allow water to drip on or into the fan motor housing. Be sure to use a soft cloth, moistened with a mild soap solution. Do not use any of the following as a cleaner: petrol, thinners or benzene. Clean the fan blade, front and rear grills with a soft moist cloth. Replace the fan blade, tighten screw and securely fasten the front grill. Fan head, base and pole cleaning Using a soft, moist cloth, with or without a mild soap solution, carefully clean the fan base, pole and head. Please use caution around the motor housing area. Do not allow the motor or other electrical components to be exposed to water. [. . . ] In the unlikely event of breakdown, please take it back to the place of purchase, with your till receipt and a copy of this guarantee. The rights and benefits under this guarantee are additional to your statutory rights which are not affected by this guarantee. Holmes Products Europe undertakes within the specific period, to repair or replace free of charge, any part of the appliance found to be defective provided that:· we are promptly informed of the defect · The appliance has not been altered in any way or subjected to misuse or repair by a person other than a person authorised by Holmes Products Europe. No rights are given under this guarantee to a person acquiring the appliance second hand or for commercial or communal uses. [. . . ]