User manual BIONAIRE BOH2503-I

[. . . ] DO NOT position where it can be touched by children, especially the very young. Allow a safe area around the heater away from furniture or other objects; at least 50 cm from the top and sides and 200 cm at the front. The heater is to be placed at least 3m from water source. DO NOT use this heater when it is lying on its side. [. . . ] Example - 9 hours USING THE TIMER Programmable timer The user can programme the heater to turn OFF after a selected period or to come ON at a preset time. FROST GUARD INSTRUCTION When the heater is in frost guard mode, the temperature will be maintained at 5° C; thus the heater will be in the off status unless the room temperature is lower than 5° C. If the room temperature is lower than 5° C, the heater will automatically start working and will keep turning on & off all the time, maintaining its ambient temperature of 5° C. To activate, press the mode button to turn the unit on, then press the thermostat/timer button twice. The ( ) icon will display to indicate that frost guard is activated. NOTE: It is normal for the heater to cycle ON and OFF as it maintains the preset temperature. Please make sure you have all of the following accessories prior to throwing away packaging. 2 Castor assemblies with four castors (R, G, & Q), and 2 U Bolts with wing nuts (T, P, S). 3) Please make sure the heater has not been plugged into any electricity outlet. After using the heater, press the mode button until the unit is deactivated and the mode light turns off, then turn the power switch to the OFF position. Set the desired heat setting by pressing the mode button. After setting the time, the digital display will stop flashing to show the timer is activated. The timer will count down until the predetermined length of time has passed, and the heater will then automatically switch off. Example - Switch OFF - The time is 1 pm. The heater is running and you require the heater to switch off at 10 pm; therefore, set the time to 9 hours. Press the thermostat/timer button (M) once to activate thermostat setting. The room temperature and a thermostat icon flash on the display. Press the + or - adjuster buttons (N) to select the desired temperature. If the heater is on, press the thermostat/timer control button 4 times. Using either the (+) or (-) adjuster buttons, 5 Setting the ON timer BOH2503D-I_IB_REV. After setting the ON timer, the digital display will stop flashing to show the timer is activated. The timer will count down until the predetermined period has passed, and then the heater will automatically switch on. [. . . ] For at aktivere, tryk på funktionsknappen, for at tænde for enheden, tryk derefter på termostat/timer knappen to gange. For at nulstille, placeres varmeapparatet i opretstående position og tryk på funktionsknappen for at genaktivere enheden. Timeren vil tælle ned indtil den forudindstillede tidsperiode er Eksempel - 4 timer LAGRINGSTIPS Dersom man ikke trenger å bruke ovnen over en lengre periode, for eksempel om sommeren, bør den oppbevares ved romtemperatur, på et tørt sted, og helst tildekket for å unngå at det samler seg støv og smuss på den. For å hindre skade på miljø eller helse fra ukontrollert avfallshåndtering på grunn av farlige stoffer i produktet, må det resirkuleres ansvarlig for å muliggjøre bærekraftig gjenbruk av materialer og ressurser. [. . . ]