Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual BIOPTECHS YEASTSLIDE. We hope that this BIOPTECHS YEASTSLIDE user guide will be useful to you.
Lastmanuals help download the user guide BIOPTECHS YEASTSLIDE.
Detailed instructions for use are in the User's Guide.
[. . . ] It selects the source of the information displayed. When the controller is turned on, the default condition is to display the setpoint value indicated by the light adjacent to the word Setpoint. The button selects one of a sequence of display options. This button can be pressed at any time and has no effect on the temperature regulation functions of the controller. [. . . ] When replacing the fuse block, make sure to align the arrow on the outside of the fuse block with the closest voltage value to your supply line voltage: · For 90-130-supply line voltage place the fuse block with the arrow pointing to 110-120V. · For 180-260 supply line voltage place the fuse block with the arrow pointing to 220-240V. Heated Lid Adjustment is the adjustment for the voltage sent to the Heated Lid. This voltage should be measured at the Heated Lid with an external meter. It should be adjusted to a value just above the condensation point. The heated lid is an option for Delta T users only. Heated Lid is the location to plug in the Bioptechs Heated Lid. The heated lid is an option for Delta T users only. Temp Out is a voltage output direct from two instrument amplifiers reading the thermistor from channel A and B. The output from this socket is temperature /10. Left pin is channel A, center pin is channel B, and right pin is ground. Remote Setpoint is an analog input that allows the user to set the controllers setpoint from an external DC source. A DC voltage can be applied to the tip of this jack equal to temperature /10. When the jack is inserted into the controller it will automatically switch to the jacks value. When removed it will default to the setting on the front of the controller. Use for programming or cycling operating temperatures. Fixing Adjustment allows the user to adjust the voltage sent to the heated slide carrier when the Fixing Switch is depressed. Fixing Switch is provided so that cells can be fixed on the stage of the microscope. It can also be used for heat shock experiments. The switch is recessed so that it is not actuated by mistake. This switch should only be used when you intentionally want to overheat your cells. It provides a nearly instantaneous heat shock! [. . . ] Pressing the mode button on the front of the controller 2. TTL communication from an external trigger such as a acquisition host or slave from a TTL shutter trigger Operate the Delta T4 in the auto (dynamic) mode when you are not scanning or acquiring images. When you intend to acquire an image activate the Imaging mode. The value of the DC current can be adjusted with the potentiometer labeled Adjust Volts. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE BIOPTECHS YEASTSLIDE
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual BIOPTECHS YEASTSLIDE will begin.
