User manual BIOSTAR TA780G M2 HP PLUS BIOS MANUAL

[. . . ] TA780G M2+/TA780G M2+ HP BIOS Manual BIOS Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 1 Main Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 2 Advanced Menu. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 3 PCIPnP Menu. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] The rest of the cards will be initialized by the PnP operating system like WindowTM 95. When set to NO, BIOS will initialize all the PnP cards. For non-PnP operating systems (DOS, NetwareTM ), this option must set to NO. Options: No (Default) / Yes 15 TA780G M2+/TA780G M2+ HP BIOS Manual PCI Latency Timer This item controls how long a PCI device can hold the PCI bus before another takes over. The longer the latency, the longer the PCI device can retain control of the bus before handing it over to another PCI device. Options: 64 (Default) / 0-255 Allocate IRQ to PCI VGA This item allows BIOS to choose a IRQ to assign for the PCI VGA card. Options: Yes (Default) / No Palette Snooping Some old graphic controllers need to "snoop" on the VGA palette and then map it to their display as a way to provide boot information and VGA compatibility. This item allows such snooping to take place. Options: Disabled (Default) / Enabled PCI IDE BusMaster This item is a toggle for the built-in driver that allows the onboard IDE controller to perform DMA (Direct Memory Access) transfers. Options: Enabled (Default) / Disabled PCI Resource PCIPnP PCI Resource IRQ3 IRQ4 IRQ5 IRQ7 IRQ9 IRQ10 IRQ11 IRQ14 IRQ15 DMA DMA DMA DMA DMA DMA Channel Channel Channel Channel Channel Channel 0 1 3 5 6 7 [Available] [Available] [Available] [Available] [Available] [Available] [Available] [Available] [Available] [Available] [Available] [Available] [Available] [Available] [Available] [Disabled] BIOS SETUP UTILITY Available: Specified IRQ is available to be used by PCI/PnP devices. Reserved: Specified IRQ is reserved for use by Legacy ISA devices. +F1 F10 ESC Select Screen Select Item Change Option General Help Save and Exit Exit Reserved Memory Size vxx. xx (C)Copyright 1985-200x, American Megatrends, Inc. 16 TA780G M2+/TA780G M2+ HP BIOS Manual IRQ3/4/5/7/9/10/11/14/15 These items will allow you to assign each system interrupt a type, depending on the type of device using the interrupt. The option "Available" means the IRQ is going to assign automatically. Options: Available (Default) DMA Channel 0/1/3/5/6/7 These items will allow you to assign each DMA channel a type, depending on the type of device using the channel. The option "Available" means the channel is going to assign automatically. Options: Available (Default) Reserved Memory Size This item allows BIOS to reserve certain memory size for specific PCI device. Options: Disabled (Default) / Enabled PCI Express Configuration PCIPnP PCI Express Configuration Active State Power-Management[Disabled] BIOS SETUP UTILITY Enable/Disable PCI Express L0s and L1 link power states. +F1 F10 ESC Select Screen Select Item Change Option General Help Save and Exit Exit vxx. xx (C)Copyright 1985-200x, American Megatrends, Inc. Active State Power-Management This item sets the ASPM configuration for the PCI Express devices before the operating system boots. This function is for OS which does not support ASPM. Options: Disabled (Default) / Enabled 17 TA780G M2+/TA780G M2+ HP BIOS Manual 4 Boot Menu This menu allows you to setup the system boot options. Main Advanced PCIPnP BIOS SETUP UTILITY Boot Chipset T-Series Exit Boot Settings Configuration > > > > Boot Device Priority Hard Disk Drives Removable Drives CD/DVD Drives [Enabled] [Disabled] [Force BIOS] [ON] [Enabled] Specifies the Boot Device Priority sequence. Quick Boot Full Screen LOGO Show AddOn ROM Display Mode Bootup Num-Lock Interrupt 19 Capture Select Screen Select Item Enter Go to Sub Screen F1 General Help F10 Save and Exit ESC Exit vxx. xx (C)Copyright 1985-200x, American Megatrends, Inc. Boot Device Priority Items in this sub-menu specify the boot device priority sequence from the available devices. The number of device items that appears on the screen depends on the number of devices installed in the system. Options: Removable / Hard Disk / CDROM / Legacy LAN / Disabled Hard Disk Drives The BIOS will attempt to arrange the hard disk boot sequence automatically. You can also change the booting sequence. The number of device items that appears on the screen depends on the number of devices installed in the system. [. . . ] Options: Always (Default) / Ganged / Unganged Power Down Enable This item controls the DRAM power down function. Options: Enabled (Default) / Disabled Power Down Mode This item allows you to select the DRAM power down mode. Options: Channel (Default) / CS 32 TA780G M2+/TA780G M2+ HP BIOS Manual ECC Configuration BIOS SETUP UTILITY ECC Configuration ECC Mode DRAM ECC Enable DRAM SCRUB REDIRECT 4-Bit ECC Mode DRAM BG Scrub Data Cache BG Scrub L2 Cache BG Scrub L3 Cache BG Scrub [Disabled] [Disabled] [Disabled] [Disabled] [Disabled] [Disabled] [Disabled] [Disabled] T-Series Set the level of ECC protection. Note: The Super ECC mode dynamically sets the DRAM scrub rate so all of memory is scrubbed in 8 hours. +F1 F10 ESC Select Screen Select Item Change Option General Help Save and Exit Exit vxx. xx (C)Copyright 1985-200x, American Megatrends, Inc. ECC Mode This item allows you to select the DRAM ECC Mode. [. . . ]