User manual BIRCHMEIER SENIOR

[. . . ] which is located on the bottom of the camera. Retain this information for future reference. Serial No. LYT1332-001B EN MasterPage: Safty_Left SENIOR. book Page 2 Wednesday, November 24, 2004 8:18 PM 2 EN Major Features of this Camera Removable hard disk In contrast to conventional digital video cameras that record to DV tapes, the removable hard disk is a new type of card media that enables extended hours of highresolution, MPEG2 video recording. 5) Enjoying Various Playback Features Unlike tape operation, playback is simple and easy in this camera since no time is needed for rewinding or fast forward operations. [. . . ] The indicator appears and stops blinking when the captured image is focused. To cancel the recording, release the recording start/stop button. To record it on the recording medium, press the recording start/stop button fully. MasterPage: Basic_Right SENIOR. book Page 23 Wednesday, November 24, 2004 8:18 PM BASIC OPERATIONS EN 23 Still Image Playback Zoom Lever Slide Show You can playback all the images stored in recording media automatically. INFO 1 Perform steps 1 – 2 in the left column. 2 Press 49 to start the slide show. MODE 49 Power Switch Lock Button To display the next image Normal Playback To display the previous image 3 5 Slide Show 1 Set the power switch to 2 Press MODE to select while pressing down the lock button located on the switch. ● A still image is displayed. ● To switch the medium to be played back, see pages 26 and 27. . Deleting Still Image Files ● You can select the desired file to be deleted by pressing w e. ● To delete multiple files at once, see pages 26 and 29. Press 49. , then press rt to select [EXECUTE] and press 3 Press 3 to display the previous file. Press 5 to display the next file. To turn on/off the on-screen display / To check the file information Press INFO repeatedly. To select the file on the index display Slide the zoom lever to W so that the index display appears. Then press rtw e to select the file and press 49. NOTES: ● Images shot and stored on the recording media with another device may not be played back correctly. ● You can zoom in/out or rotate still images. For details, read the advanced operation manual. TV Dubbing to a VCR VCR A Black to S-VIDEO IN (Connect when your TV/VCR has S-VIDEO IN and A/V input connectors. In this case, it is not necessary to connect the yellow video cable. ) B Yellow to VIDEO IN (Connect when your TV/VCR has only A/V input connectors. ) C Red to AUDIO R IN* D White to AUDIO L IN* * Not required for watching still images only. 1 Perform step 1 to 6 above. 2 At the point you want to start dubbing, start recording on the VCR. (Refer to the VCR’s instruction manual. ) 3 To stop dubbing, stop recording on the VCR, then stop playback on the camera. 1 Make sure all units are turned off. 2 Connect the camera to a TV or VCR as shown in the illustration. If not, go to step 4. 3 Connect the VCR output to the TV input, referring to your VCR’s instruction manual. 4 Turn on the camera, the VCR and the TV. 5 Set the VCR to its AUX input mode, and set the TV to its VIDEO mode. BASIC OPERATIONS MasterPage: Heading0_Left SENIOR. book Page 26 Wednesday, November 24, 2004 8:18 PM 26 EN MENU SETTINGS NOTE: Information on the following pages (੬ pg. 26 – 31) are only excerpts of menu settings. Refer to the advanced operation manual in the CD-ROM for the full descriptions. 32) Changing the Menu Settings You can change the menu settings to customize your camera. Access the desired menu screen by following the steps below, then change the various settings. INFO MENU Common Menus for All Modes [ ] = Factory-preset MODE Power Switch Lock Button r 49 BASIC SETTING PRESET EXECUTE: Resets all settings to the factory-preset. [. . . ] When requesting repairs for malfunctioning by your dealer or BIRCHMEIER service center, be sure to bring your camera together with the removable hard disk. If one of them is not included, the cause cannot be diagnosed, and the repair cannot be made properly. The camera is a microcomputer-controlled device. External noise and interference (from a TV, a radio, etc. ) might prevent it from functioning properly. [. . . ]