User manual BISSELL FEATHERWEIGHT

[. . . ] Do not pull or carry by cord, use cord as a handle, close door on cord, pull cord around sharp corners or edges, run appliance over cord, or expose cord to heated surfaces. Do not handle plug or appliance with wet hands. Do not expose hair, loose clothing, fingers or body parts to openings or moving parts. Do not pick up hot or burning objects such as cigarettes, matches, or hot ashes. [. . . ] Once handle is all the way inserted into the body of the vacuum, press the latch closed to secure the handle in place. Attach the floor nozzle by inserting it into the opening at the bottom of the dirt container. As a Hand Vacuum: Release the latch from the handle and pull handle away from the unit. As a Multi-Purpose Vacuum: The crevice tool and floor nozzle may be used with either the hand vacuum or the floor vacuum. To use for cleaning in tight spaces, insert the crevice tool into the opening at the bottom of the dirt container. To clean a wider surface, remove the crevice tool and attach the floor nozzle by inserting it into the opening at the bottom of the dirt container. Press firmly to secure in place. 1 2. 2 3. 3 Power cord 1. Unplug power cord by grasping the plug, NOT the cord, and disconnect from outlet. Loop power cord around cord wraps on the handle. Secure plug to power cord. Maintenance and care To maintain maximum performance from your BISSELL FeatherWeight vacuum, perform these simple maintenance checks: WA R N I Ncleaner G: To avoid injury, turn OFF and unplug Cord from wall when not in use. 1 Emptying the dirt container 1. To remove dirt from the dirt container and filter, hold the vacuum vertically as shown. Depress and hold latch on top of the vacuum to release the dirt container. Gently pull dirt container away from the hand vacuum grip and empty into waste container. The dirt container may be rinsed with warm water and a mild detergent if needed. The dirt container must be thoroughly dried before replacing. Attach dirt container to vacuum by depressing latch and securely fitting onto hand vacuum grip. Make sure dirt container is correctly secured. 2. 3. 2 4. www. bissell. com 5 9/25/07 2:28:08 PM ug603-5513_3106J_907. indd 5 Maintenance and care Cleaning the filter The key to maximum performance is a clean filter. Cleaning the filter after each use will help your FeatherWeight vacuum operate at peak efficiency. Use only BISSELL replacement filters (#32019) in your BISSELL FeatherWeight. Follow the steps on page 5 to remove dirt container. 3. CAUTION: Never operate your FeatherWeight vacuum without the filter in place. [. . . ] Please record your Model Number: ___________________ Please record your Purchase Date: ___________________ Note: Please keep your original sales receipt. It provides proof of date of purchase in the event of a warranty claim. Please do not return this product to the store. Replacement parts - BISSELL FeatherWeight Below is a list of common replacement parts. While not all of these parts may have come with your specific machine, all are available to you for purchase, if desired. Item 1 2 3 4 5 Part No. 32019 203-2202 203-2203 203-5517 203-2250 Part Name Filter Crevice Tool Floor Nozzle Dirt Container Handle 1 2 3 4 5 www. bissell. com 7 9/25/07 2:28:09 PM ug603-5513_3106J_907. indd 7 Warranty - FeatherWeight This warranty gives you specific legal rights, and you may also have other rights which may vary from country to country. [. . . ]