User manual BISSELL PROHEAT

[. . . ] PROheat USER'S GUIDE 57G7 SERIES 220-240v 3 Safety Instructions TM 4-5 Product view 6 Assembly 7-8 Special Features 9-14 Operation 15 Maintenance and Care 16-17 Troubleshooting 18 Consumer Services 18 Replacement Parts 19 19 Formulas Additional Accessories 20 Warranty Thank you for buying a BISSELL ProHeat deep cleaner We're glad you purchased a BISSELL ProHeat deep cleaner. Everything we know about floor care went into the design and construction of this complete, high-tech home cleaning system. By purchasing this product you are helping BISSELL with our commitment to reducing our impact on the environment through an expanding range of sustainable design efforts. Your ProHeat deep cleaner is well made, and we back it with a limited one-year warranty. [. . . ] Colored stuffing may bleed through fabric when wet. Plan activities to give upholstery time to dry. 2. 4. Manufacturer's tag 12 www. bissell. com Operation ReadyToolsTM (continued) 5. Vacuum thoroughly to pick up loose debris and pet hair. Use a vacuum with a brush attachment and a crevice tool to clean in fabric folds and tufts. To begin cleaning with attachments, follow the instructions on page 10 for filling the 2-in-1 water tank. Set the ReadyTools dial to the TooLS setting. This will allow spray and suction from the hose. Attach the cleaning tool of your choice to the end of the hose. Clean by pressing the spray trigger to spray solution onto the area to be cleaned. Slowly move the tool back and forth over the soiled surface. Release the spray trigger to suction dirty water. Continue to clean in the area, working in small sections, until dirt is removed. Caution: Do Not Overwet. 7. 6. 7. When finished cleaning, remove and rinse tool(s) in clean, running water. It is recommended that you suction clean water from the tap to rinse out the hose. Before wrapping hose onto tool rack, lift end of hose and stretch out to ensure all water is cleared from hose. Empty 2-in-1 water tank and rinse out, following instructions on page 12. If the ReadyTools dial becomes difficult to turn, the diverter assembly that holds the dial may need to be cleaned. To clean, first remove nozzle and locate screw that holds the diverter assembly in place. With a Phillips screwdriver, remove the screw and set aside. Remove diverter assembly; hold under running water making sure water flows through and around the dial. [. . . ] 2-in-1 water tank lid is not properly installed. 2-in-1 water tank is not properly seated. 2-in-1 water tank has picked up maximum dirty water. The lint screen may be clogged. Other maintenance or service not included in the manual should be performed by an authorized service representative. Thank you for selecting a BISSELL product. Please do not return this product to the store www. bissell. com 17 BISSELL Consumer Services In the UK, Australia or New Zealand, call BISSELL Consumer Services at the numbers below and we will give you the location of a BISSELL Authorized Service Center in your area. [. . . ]