User manual BLACK & DECKER BDV1085

[. . . ] UK Ireland Australia New Zealand 2 Intended use Your Black & Decker battery charger is designed to charge lead-acid batteries. This product is intended for household, consumer use only. Power cord safety Warning!If it will not fit, have a proper outlet installed by a qualified electrician. Improper connection may result in an electric shock. [. . . ] Note: The default selection is the maintenance free type battery (11). Press the 2/10/30A pushbutton (15) to begin charging at the 2 A rate; the appliance sounds a beep and displays the charging current. The battery charger starts charging at the 2 A rate automatically if the 2/10/30A pushbutton (15) is not pressed within 3 minutes after applying ac power. If the digital display (1) on the battery charger varies between F03 and the Amp rate, the battery is sulphated and the battery charger is trying to give it some charge. If after approximately 3 hours the digital display (1) just shows F03, then the battery will not charge. The battery charger occasionally sounds a beep and displays 0. 0 during self-test or charging stage changes. This is normal. 80 A pushbutton (12) (engine start). This pushbutton places the battery charger in an engine start sequence. This pushbutton will not be activated unless the battery charger is in the 30 A charge mode. Set the 2/10/30A pushbutton (15) to 30 A first to activate this pushbutton. This pushbutton enables a five-second check that measures the battery voltage. This check is repeated at various electrical load levels and the tests allow the user to determine if the alternator can keep up with the loads. It can indicate whether an alternator service may be required. This pushbutton enables a check to measure the battery voltage. 6 Pressing the 2/10/30A pushbutton (15) again advances the charging rate to 10 A, and pressing the pushbutton once more advances the charging rate to 30 A. (Pressing the pushbutton again will turn OFF the battery charger output and the digital display (1) will show 000). Note: This selection and the actual battery charge rate are monitored by the microprocessor, and the appliance will stop charging if the selected rate is too fast or too slow for battery size or condition. As the battery nears full charge capacity, the appliance's output will automatically drop to a lower charge rate. Pressing the 2/10/30A (15) button repeatedly advances to stand-by mode; the appliance sounds a beep, displays 000 and stops charging. The battery charger displays the charge current. To view the battery voltage, press the battery voltage pushbutton (14). The charger will sound a beep and display the battery voltage. Press the battery voltage pushbutton (14) again to return to displaying the charge current. [. . . ] To take advantage of this service please return your product to any authorised repair agent who will collect them on our behalf. 9 You can check the location of your nearest authorised repair agent by contacting your local Black & Decker office at the address indicated in this manual. Alternatively, a list of authorised Black & Decker repair agents and full details of our after-sales service and contacts are available on the Internet at: www. 2helpU. com. Lead acid batteries can be recharged many times. At the end of their useful life, discard batteries with due care for our environment: Do not dispose of the battery in fire, as this may result in an explosion. [. . . ]