User manual BLACK & DECKER CD105

[. . . ] Do not wear loose clothing or jewellery. Keep your hair, clothing and gloves away from moving parts. Loose clothes, jewellery or long hair can be caught in moving parts. If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly used. [. . . ] Keep cord away from heat, oil, sharp edges or moving parts. Such preventive safety measures reduce the risk of starting the power tool accidentally. Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool. Power tools are dangerous in the hands of untrained users. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the power tools operation. If damaged, have the power tool repaired before use. Many accidents are caused by poorly maintained power tools. Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control. Use the power tool, accessories and tool bits etc. , in accordance with these instructions, taking into account the working conditions and the work to be performed. Use of the power tool for operations different from those intended could result in a hazardous situation. also , remove excess grease spots , bug stains etc. Using liquid wax & paste wax Black & Decker recommends the use of liquid wax with this polisher. For best results, use light pressure only, letting the polisher do the work. The bonnets (5 and 6) can be hand-washed in lukewarm and mind detergent, then machine dry at the lowest setting. Liquid wax is recommended to use with this polisher. The most common error is applying too much wax. If pad becomes saturated, it will not last as long, and polishing will be more diffcult and take longer. Too much wax may have been applied if: - towel applicator bonnet (5) continually comes off pad; - buffing seems difficult. The polishing bonnet is only to be used for the final buff. This first application should do about 1/4 of the car. For the second and third applications of wax, use half the quantity stated above. [. . . ] Black & Decker and Piranha accessories are engineered to high quality standards and designed to enhance the performance of your tool. By using these accessories you will get the very best from your tool. Black & Decker offers a large selection of accessories available at our local dealer or authorized service center at extra cost. The use of any other accessory not recommended for use with this tool could be hazardous. [. . . ]