User manual BLACK & DECKER DN 83

[. . . ] On the purchase of your Black & Decker belt sander. To ensure the best results from your belt sander please read these safety and usage instructions carefully. If you have any questions or queries after reading this manual please do not hesitate to call your local service and information centre (the number is towards the back of this manual). Contents Page 4 Page 5 Safety instructions Double insulation Electrical safety Mains plug replacement Extension cables Unwanted tools and the environment The Black & Decker guarantee After sales service for your Black & Decker product Page 6 Our after sales service policy Accessories Technical data Features Operating your belt sander Belt speed control (electronic models only) Page 7 Changing the sanding belt Adjusting the sanding belt tracking Dust collection Handy hints Tool care Page 8 EC declaration of conformity Black & Decker phone numbers and addresses Guarantee card Belt sander user manual SAFETY INSTRUCTIONS Warning! [. . . ] This means that all the external metal parts are electrically insulated from the mains power supply. This is done by ENGLISH placing insulation barriers between the electrical and mechanical components making it unnecessary for the tool to be earthed. Note: Double insulation does not take the place of normal safety precautions when operating the tool. The insulation system is for added protection against injury resulting from a possible electrical insulation failure within the tool. ELECTRICAL SAFETY Be sure the supply is the same as the voltage given on the rating plate. The tool is fitted with a two-core cable and plug. MAINS PLUG REPLACEMENT (UK ONLY) Should the mains plug need replacing and you are competent to do this, proceed as instructed below. If you are in doubt, contact a Black & Decker service agent or a qualified electrician. €¢ Disconnect the plug from the power supply. • Cut off the plug and dispose of safely. A plug with bared copper conductors is very dangerous if engaged in a live socket outlet. €¢ Only fit BS1363A approved plugs fitted with the correctly rated fuse. Note: Fuses do not give personal protection against electric shock. €¢ The cable wire colours, or a letter, will be marked at the connection point of most good quality plugs. Attach the wires to their respective points in the plug (see diagram). Brown is L (live) and blue is N (neutral). fit amp fuse Fit a plug Fit aa55amp fuse E (KA83) approved or 13 amp L to BS1363A fuse (KA75) N Warning!Never connect live or neutral wires to the earth pin marked E or . MAINS PLUG REPLACEMENT (AUSTRALIA AND NEW ZEALAND ONLY) Should the mains plug or cordset of the product be damaged, it must only be replaced by an authorised Black & Decker service agent because special purpose tools are required. EXTENSION CABLES Up to 30m (100ft) of 3-core extension cable can be used without undue loss of power. Note: An extension cable should not be used unless absolutely necessary. Use of an improper extension cable could result in a risk of fire and electric shock. [. . . ] Front handle Dust collection bag or vacuum cleaner connection Lock-on switch Tracking adjustment knob On/off switch Drive roller Sanding belt tension lever Front belt roller Belt rotation direction indicator Belt speed control (electronic models only) OPERATING YOUR BELT SANDER To start your belt sander, depress the on/off switch (5). To stop your belt sander release the on/off switch. if continuous operation is required , proceed as follows: Depress the on/off switch (5). Depress the lock-on button (3) and release the on/off switch. [. . . ]