User manual BLACK & DECKER GK1635

[. . . ] GK1630T GK1635T GK1640T English (Original instructions) 6 2 3 4 5 Intended use Your Black & Decker chainsaw has been designed for pruning and felling trees and cutting logs. This tool is intended for consumer use only. Safety instructions General power tool safety warnings @ Warning!Read all safety warnings and all instructions. Failure to follow the warnings and instructions listed below may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference. [. . . ] u Injuries caused when changing any parts, blades or accessories. u Injuries caused by prolonged use of a tool. When using any tool for prolonged periods ensure you take regular breaks. u Health hazards caused by breathing dust developed when using your tool (example:- working with wood, especially oak, beech and MDF. ) 1. On/off switch 2. Lock-off button 3. Oil cap 4. Front guard/chain brake 5. Oil level indicator 6. Chain 7. Guide bar 8. Chain sheath 9. Control knob 10. Chain cover assembly Assembly @ @ Warning!Always wear protective gloves when working on your chainsaw. Before performing any maintenance on power tools, switch off and unplug the appliance. Oiling the chain Labels on tool i; The following pictograms are shown on the tool: Warning!To reduce the risk of injury, the user must read the instruction manual. : R C Always wear ear and eye protection Do not expose the tool to rain or high humidity. Always remove the plug from the socket before inspecting a damaged cable. Be careful not to use your chainsaw if the cable is damaged. You must do this whenever you use a new chain (6) for the first time. Take the new chain (6) and soak it in chain oil for at least an hour before using it. We recommend that you use only Black & Decker oil during the lifetime of your chainsaw because mixtures of different oils could lead to the oil becoming degraded, which can drastically shorten the lifetime of the saw chain and create additional risks. Never use waste oil, thick oil or very thin sewing machine oil. These may damage your chainsaw. Fitting the guide bar and chain. A - E) u u Place the chainsaw onto a stable surface. Set the front guard/chain brake assembly to the forward position (fig. u Fully loosen the control knob (9) (fig. u Remove the chain cover assembly (10). 9 Place the chain (6) over the guide bar (7) making sure that the saw chain cutters on the upper part of the guide bar (7) face towards the front (fig. u Guide the chain (6) around the guide bar (7) and pull it to create a loop to one side at the rear end of the guide bar (7). u Guide the chain (6) around the drive sprocket (12). Place the guide bar (7) onto the bar location studs (13) (fig. E). u u Allow the control knob to spring back to the „out“ position and rotate further clockwise to tighten the guide bar. Do not overload. Filling the oil reservoir (fig. [. . . ] Should you find one day that your Black & Decker product needs replacement, or if it is of no further use to you, do not dispose of it with household waste. Make this product available for separate collection. Technical data Bar length cm Voltage VAC Power input W Chain speed (no load) m/s Max cutting length cm Oil capacity ml Weight kg Safety class Bar length cm Voltage VAC Power input W Chain speed (no load) m/s Max cutting length cm Oil capacity ml Weight kg Safety class GK1630T Typ. 5 30 230 1600 8 30 180 3. 7 II GK1635T Typ. 5 35 230 1600 8 35 180 3. 8 II z Separate collection of used products and packaging allows materials to be recycled and used again. [. . . ]