User manual BLACK & DECKER GT4550

[. . . ] GT4245 GT4550 A B C D 0-15 E 2 F G H I 3 ENGLISH (Original instructions) 3. Personal safety a. Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol or medication. A moment of inattention while operating power tools may result in serious personal injury. Protective equipment such as dust mask, non-skid safety shoes, hard hat, or hearing protection used for appropriate conditions will reduce personal injuries. [. . . ] u Do not put the tool down until the blades have come to a complete standstill. u Regularly check the blades for damage and wear. Do not use the tool when the blades are damaged. u Take care to avoid hard objects (e. g. Should you accidentally hit any such object, immediately switch the tool off and check for any damage. u Should the tool start to vibrate abnormally, immediately switch it off and disconnect it from the mains suply then check for any damage. u If the tool stalls, immediately switch it off. Disconnect it from the mains supply before attempting to remove any obstructions. u After use, place the blade sheath supplied over the blades. Store the tool, making sure that the blade is not exposed. u Always ensure that all guards are fitted when using the tool. Never attempt to use an incomplete tool or a tool with unauthorised modifications. u Never allow children to use the tool. u Be aware of falling debris when cutting the higher sides of a hedge. u Always hold the tool with both hands and by the handles provided. Safety of others u This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. u Children should be supervised to ensure that they do not play with the appliance. Residual risks. Additional residual risks may arise when using the tool which may not be included in the enclosed safety warnings. These risks can arise from misuse, prolonged use etc. Even with the application of the relevant safety regulations and the implementation of safety devices, certain residual risks can not be avoided. These include: u Injuries caused by touching any rotating/moving parts. u Injuries caused when changing any parts, blades or accessories. u Injuries caused by prolonged use of a tool. When using any tool for prolonged periods ensure you take regular breaks. [. . . ] No connection is to be made to the earth terminal. Follow the fitting instructions supplied with good quality plugs. Recommended fuse: 5 A. 7 ENGLISH (Original instructions) Protecting the environment Should you find one day that your Black & Decker product needs replacement, or if it is of no further use to you, do not dispose of it with household waste. Make this product available for separate collection. Z z Technical data GT4245 (Type 1) Voltage Power input Blade strokes (no load) Blade length Blade gap Blade brake time Weight VAC W min-1 cm mm s kg 230 420 1960 45 16 <1 2. 1 GT4550 (Type 1) 230 450 1815 50 18 <1 2. 4 Separate collection. [. . . ]