User manual BLACK & DECKER HP188F2K

[. . . ] HP126F2K HP146F2K HP148F2K HP188F2K 1 Copyright Black & Decker 2 5 6 4 3 2 1 10 8 7 9 14 13 11 13 12 A 3 10 9 17 15 16 B C 19 4 18 19 20 21 D 4 14 13 13 12 9 11 9 E F 23 22 2 G H 5 5 3 24 I J 6 ENGLISH CORDLESS DRILL/SCREWDRIVER HP126F2K/HP146F2K/HP148F2K/HP188F2K CONGRATULATIONS!You have chosen a Black & Decker tool. Our aim is to provide quality tools at an affordable price. We hope that you will enjoy using this tool for many years. [. . . ] Do not use the plug if the fuse cover is missing or damaged. Fitting and removing the battery (fig. B) x To fit the battery (9), line it up with the receptacle on the tool. Slide the battery into the receptacle and push until the battery snaps into place. x To remove the battery, push the release button (10) while at the same time pulling the battery out of the receptacle. Fitting and removing a drill bit or screwdriver bit (fig. A & C) This tool is fitted with a keyless chuck to allow for an easy exchange of bits. x Lock the tool by setting the forward/reverse slider (2) to the centre position (fig. x Open the chuck by turning the front part (15) with one hand while holding the rear part (16) with the other (fig. x Insert the bit shaft (17) into the chuck. x Firmly tighten the chuck by turning the front part (15) with one hand while holding the rear part (16) with the other. This tool is supplied with a double-ended screwdriver bit in the bit holder (7) (fig. x To remove the screwdriver bit from the bit holder, lift the bit from the recess. x To store the screwdriver bit, firmly push it into the holder. HP126F2/HP146F2 - Removing and fitting the chuck (fig. D) The chuck on these models can be easily removed and refitted. When your project entails both drilling and screwdriving, fit a screwriver bit in the spindle and a drill bit in the chuck: you will then only need to remove the chuck for screwdriving and refit it for drilling. The screwdriver bit can be left in the spindle while drilling. You can also fit drill bits with a hexagonal shaft in this way. Never use a light socket. A) Variable speed switch Forward/reverse slider Mode selector / torque adjustment collar Chuck Two-gear selector Battery charge indicator (HP148F2/HP188F2) Bit holder Side handle (HP188F2) 1. 8. 10 ENGLISH x x x To remove the chuck (4), keep the release tabs (18) depressed and pull the chuck off the spindle (19). Install a screwdriver bit (20) by pushing it into the spindle (19) as shown. To remove the screwdriver bit, pull the ring (21) back and pull the screwdriver bit out of the spindle. [. . . ] x The product has not sustained any damage through foreign objects, substances or accidents. x Repairs have not been attempted by anyone other than our service staff or authorised repair agents. This guarantee is offered as an extra benefit and does not affect your statutory rights. AFTER SALES SERVICE (UK, SOUTH AFRICA, AUSTRALIA AND NEW ZEALAND ONLY) Black & Decker offers a nationwide network of authorised repair agents. [. . . ]