User manual BLACK & DECKER KA 280 K

[. . . ] Your Black & Decker sander has been designed for sanding wood, metal, plastics and painted surfaces. This tool is intended for consumer use only. If operating a power tool in a damp location is unavoidable, use a Residual Current Device (RCD) protected supply. Use of an RCD reduces the risk of electric shock. [. . . ] J & K) Choose the sanding profile most suitable for your application. ρ Place one end of the sanding profile (20) into the recess at the front end of the profile attachment (19). ρ Push the other end of the sanding profile until it clicks into place. ρ To remove the sanding profile (20), push it forward and pull the rear end out of the profile attachment (19).  Fitting a sanding sheet onto a sanding profile (fig. L) Align the sanding sheet (21) with the sanding profile (20). ρ Press the sanding sheet onto the sanding profile, making sure that the sanding sheet follows the shape of the profile.  ENGLISH Louvre attachment (fig. M) (KA280L only) With the louvre attachment you can work in crevices. ρ Remove the diamond-shaped tip holder (16) from the sanding base. ρ Fit the louvre attachment (22) onto the sanding base. ρ Fit the appropriate sanding sheet onto the louvre attachment. The additional piece of hook and loop fastener (23) can be attached to the top surface of the louvre attachment to allow for sanding using both sides. ρ Remove the backing paper from the hook and loop fastener (23). ρ Stick the hook and loop fastener to the top surface of the louvre attachment (22). ρ Fit the sanding piece to the hook and loop fastener. Residual risks Additional residual risks may arise when using the tool which may not be included in the enclosed safety warnings. These risks can arise from misuse, prolonged use etc. Even with the application of the relevant safety regulations and the implementation of safety devices, certain residual risks cannot be avoided. These include:  Injuries caused by touching any rotating/moving parts. ρ Injuries caused when changing any parts, blades or accessories.  Injuries caused by prolonged use of a tool. [. . . ] To claim on the guarantee, you will need to submit proof of purchase to the seller or an authorised repair agent. You can check the location of your nearest authorised repair agent by contacting your local Black & Decker office at the address indicated in this manual. Alternatively, a list of authorised Black & Decker repair agents and full details of our aftersales service and contacts are available on the Internet at: www. Uk to register your new Black & Decker product and to be kept up to date on new products and special offers. [. . . ]